Author Topic: upcoming Festool CSC SYC 50 EBI  (Read 24932 times)

0 Members and 1 Guest are viewing this topic.

Offline squall_line

  • Posts: 1640
Re: upcoming Festool CSC SYC 50 EBI
« Reply #120 on: November 16, 2022, 10:43 PM »

Really curious now what they have cooking for a router table. There's no way they can leave that gap in their lineup for the whole mobile cabinetry image they're going with.


THIS !!!!!! ^^^^^^^^^^^

Why in the world would Festy abandon the CMS concept, to compete a million other companies making site saws?
If they had asked; I would have said, give us a CMS insert for the HK85. A modular throat plate would have allowed us to use the grooving attachment, albeit with limited depth. The TS 75 CMS insert is awesome, they should have improved on the CMS concept. We're carpenters doing actual site work, not millennials looking for ourselves and digital gizmos...
Festy, you get an F...
E.

Safety regs.  All portable tools have to move to a No-volt release (NVR) switch in the EU, and an NVR switch is not compatible with a remote on-off switch that is at the heart of the CMS system, because you would have to reset the switch on the tool for each activation.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Econoline

  • Posts: 39
Re: upcoming Festool CSC SYC 50 EBI
« Reply #121 on: November 18, 2022, 04:20 PM »
Festy should move the CMS team and assembly to the US. They still get an F...
E.

Offline Coen

  • Posts: 1904
Re: upcoming Festool CSC SYC 50 EBI
« Reply #122 on: November 19, 2022, 01:43 PM »
I doubt there is a ban on exports?

Offline squall_line

  • Posts: 1640
Re: upcoming Festool CSC SYC 50 EBI
« Reply #123 on: November 19, 2022, 10:10 PM »
It wouldn't matter if the CMS "team" was in the US if all of Festool's offerings ended up receiving an NVR switch during their next redesign; it would completely negate the usability of the CMS system as currently designed.

Offline Econoline

  • Posts: 39
Re: upcoming Festool CSC SYC 50 EBI
« Reply #124 on: November 20, 2022, 11:43 AM »
Festy gets an F...

Offline Crazyraceguy

  • Posts: 2086
Re: upcoming Festool CSC SYC 50 EBI
« Reply #125 on: November 20, 2022, 02:16 PM »
I saw Festool demo video about these this morning. That's when I noticed it was Festool/UK  [unsure]
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation/Plate
MFT clamps set
Installers set
Centrotech organizer set
Socket/Ratchet set

Offline _Ben_

  • Posts: 52
Re: upcoming Festool CSC SYC 50 EBI
« Reply #126 on: November 20, 2022, 04:23 PM »
Hopefully by the time it's released I'll have figured a reason to buy it.

I guess the beauty of the battery platform is that it can be released globally a bit easier I should think. Sure it'll be in US in no time.

No doubt also working on a router table with fixed motor to get around NVR requirement.

Offline NonsuchMatt

  • Posts: 1
Re: upcoming Festool CSC SYC 50 EBI
« Reply #127 on: November 28, 2022, 12:56 PM »
Too much obsession with battery power in my view. Who is this aimed at? Someone doing finish work in a home without utilities??

Reliable power on a job site is hard to come by. Battery powered tools have been a major boon to my productivity. No more waiting around, losing an extension cord, fighting over a quad box, etc. Just working.