Author Topic: VAC SYS DISCONTINUED?  (Read 97099 times)

0 Members and 1 Guest are viewing this topic.

Offline oberlin1

  • Posts: 35
  • Larry
Re: VAC SYS DISCONTINUED?
« Reply #480 on: June 07, 2022, 03:08 PM »
Batanimal , thanks for the heads up on the SE1.  Ordered it…now to figure out a pump!

Oberlin1.
CXS, ETC-125, TS-75, CT-26E, LS-130, RO-150 FEQ

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online batmanimal

  • Posts: 111
Re: VAC SYS DISCONTINUED?
« Reply #481 on: June 07, 2022, 04:00 PM »
Batanimal , thanks for the heads up on the SE1.  Ordered it…now to figure out a pump!

Oberlin1.

You’re in the right place! Search this thread for “excel” and you should be well on your way.

Glad you got the SE1!

Offline RODNEY9043

  • Posts: 6
Re: VAC SYS DISCONTINUED?
« Reply #482 on: June 07, 2022, 04:50 PM »
just post a complete set today in clasified section

Offline oberlin1

  • Posts: 35
  • Larry
Re: VAC SYS DISCONTINUED?
« Reply #483 on: June 09, 2022, 11:07 AM »
Re the product from Joe Woodworking do I need the Excel 5 or would the 1 or 3 work?
CXS, ETC-125, TS-75, CT-26E, LS-130, RO-150 FEQ

Online batmanimal

  • Posts: 111
Re: VAC SYS DISCONTINUED?
« Reply #484 on: June 09, 2022, 11:57 AM »
Re the product from Joe Woodworking do I need the Excel 5 or would the 1 or 3 work?

The Excel 3 will work (see reply #305 for details)
https://www.festoolownersgroup.com/festool-tools-accessories/vac-sys-discontinued/300/

Offline oberlin1

  • Posts: 35
  • Larry
Re: VAC SYS DISCONTINUED?
« Reply #485 on: June 09, 2022, 01:01 PM »
Thanks batanimal!
CXS, ETC-125, TS-75, CT-26E, LS-130, RO-150 FEQ

Offline krudawg

  • Posts: 155
Re: VAC SYS DISCONTINUED?
« Reply #486 on: June 26, 2022, 12:31 PM »
I just ordered SE1 and SE2.  I couldn't find pump for sale anywhere... but thanks to FOG members I can use different pump to work with it. 

-Upon reading this thread, looks like "Vaneer Excel 3 Pump" works with SE units.  Is this the site I can make purchase? (https://www.veneersupplies.com/products/Excel-3-Continuous-Run-Vacuum-Press-System.html)

-Is "Excel 3" 120V? or 240V?

-Is "Excel 5" too powerful? it's 5.0 cfm.

-Thankfully one of the member in this thread listed extra parts I will need for the setup. Is there any instruction video or steps I can follow for setting up SE1 and SE2 with this pump?

I can't wait to use them for my shop and thanks for making this work guys! :)
I can't find SE1 or SE2.  Can someone post a link for it.  Thanks
Ted
MFT/3, DF 500, Hammer K3 Winner, TS55,  Sjoberg Elite 1500 Workbench, Fuji MiniMite4 Platinum, OF1400, CT MIdi, CT26, RO90, ETC-150, CT26, Midi,
Former Marine, Vietnam Vet

Offline Econoline

  • Posts: 35
Re: VAC SYS DISCONTINUED?
« Reply #487 on: July 01, 2022, 01:31 PM »
The Vac-Sys does indeed save a lot time...

Offline Econoline

  • Posts: 35
Re: VAC SYS DISCONTINUED?
« Reply #488 on: July 01, 2022, 02:07 PM »
"save a lot of time"

Offline jstout

  • Posts: 5
Re: VAC SYS DISCONTINUED?
« Reply #489 on: July 28, 2022, 11:56 PM »
Lee Valley has the Vac-Sys System Set back in stock for anyone who is interested.

Offline kmickey

  • Posts: 43
Re: VAC SYS DISCONTINUED?
« Reply #490 on: July 29, 2022, 01:59 AM »
Lee Valley has the Vac-Sys System Set back in stock for anyone who is interested.
Still available 23(?) hours later.  Not sure which zone time stamps are located in, or if they’re all local to me.  Ordered as soon as I saw this.

Offline oberlin1

  • Posts: 35
  • Larry
Re: VAC SYS DISCONTINUED?
« Reply #491 on: July 29, 2022, 09:28 AM »
Thanks for the heads-up.  Received a confirmation…we’ll see if it holds up.
CXS, ETC-125, TS-75, CT-26E, LS-130, RO-150 FEQ

Offline kmickey

  • Posts: 43
Re: VAC SYS DISCONTINUED?
« Reply #492 on: July 29, 2022, 10:54 AM »
Lee Valley has the Vac-Sys System Set back in stock for anyone who is interested.
Still available 23(?) hours later.  Not sure which zone time stamps are located in, or if they’re all local to me.  Ordered as soon as I saw this.

And they’re out of stock now…. But I did get a confirmation email.