« previous next »
Pages: [1]   Go Down

Author Topic: Vac hose driving me crazy  (Read 1372 times)

0 Members and 1 Guest are viewing this topic.

Offline JimmyB1775

  • Posts: 31
Vac hose driving me crazy
« on: February 27, 2019, 03:39 PM »
So I've got the old (year or more) green and black ribbed hose for my Mini. It obviously had issues with catching on workpieces, even on the catch guard track attachment. I put some aftermarket wire loom type stuff (the braided look) that makes it very similar to the woven black and green that comes standard now. It does not help a ton, but some. They make that anti-static hose now with the power cord underneath the canvas jacket or whatever material it is, but that thing is $340! My vac is too small to buy their boom system.

It's driving me crazy. I flattened an oak slab two days ago with a homemade sled and lots of back and forth had me going nuts. What are my solutions for this, preferably that don't cost more than $280!!! The tools work too good for this to be as frustrating as it is.
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline tallgrass

  • Posts: 921
Re: Vac hose driving me crazy
« Reply #1 on: February 27, 2019, 03:55 PM »
have you looked at putting the mesh  hose wire organizer over your hose. Many on this forum do this.l it is easy and inexpensive. I have found it works well. It has at least cut down the number of Rage moments
Logged

Offline tallgrass

  • Posts: 921
Re: Vac hose driving me crazy
« Reply #2 on: February 27, 2019, 03:59 PM »
Logged

Online SRSemenza

  • Global Moderator
  • *
  • Posts: 9240
  • Finger Lakes Region, NY State , USA
Re: Vac hose driving me crazy
« Reply #3 on: February 27, 2019, 04:03 PM »
Extend the hose and hang it from the ceiling?

Some people run it over there arm or shoulder.

Still pricey but the new hose https://www.festoolusa.com/accessory/500680---d-2732x3,5m-as-90%C2%B0ct

Seth
Logged

Offline RKA

  • Posts: 1961
Re: Vac hose driving me crazy
« Reply #4 on: February 27, 2019, 04:10 PM »
Sling the hose over your forearm or shoulder (depending on what you're doing). 
Logged
-Raj

Offline rmhinden

  • Posts: 315
Re: Vac hose driving me crazy
« Reply #5 on: February 27, 2019, 05:26 PM »
I used this:

25ft - 1.25 inch Flexo PET Expandable Braided Sleeving – Black – Alex Tech Braided Cable Sleeve

Only $11, mentions using it for a Festool hose in one of the reviews.  I used electrical tape at the ends to secure it.
Logged

Offline jasen

  • Posts: 48
Re: Vac hose driving me crazy
« Reply #6 on: February 27, 2019, 07:14 PM »
Not that I do alot of cutting but annoyed the heck out of me (I'm really still a newbie but learning everyday)

I was watching the video by tjbnwi in the TPG30 thread (really great watching his videos - thank you) and I watched him wrap the cable and vac hose over his forearm.

Hppened to use my saw last night for a small reno job - WOW talk about chalk and cheese. Its so easy and intuitive - I did a dozen cuts and so much easier. Give it a try - you might be surprised.
Cheers
Logged

Offline JPCleary

  • Posts: 25
Re: Vac hose driving me crazy
« Reply #7 on: February 27, 2019, 07:20 PM »
Have you considered just buying the new version of the hose? While I understand that paying for the $340 canvas wrapped and power cord integrated hose is steep, it's only $130 for the new smooth hose. That's less than your $280 number...
Logged
Not a professional, just a DIY festfool with apparently too much money on his hands -- Kapex120 | TS75 | OF1400 | CT26 | ETS EC125 | Carvex PS420 | CXS | Vecturo | MW 1000 | x2 MFT3 | UG Stand w/ wings

Offline DynaGlide

  • Posts: 738
Re: Vac hose driving me crazy
« Reply #8 on: February 27, 2019, 09:32 PM »
Are you shop based? Bungie straps from the ceiling and an extension hose work wonders.
Logged
Instagram @matts.garage

Offline Alex

  • Posts: 6569
Re: Vac hose driving me crazy
« Reply #9 on: February 28, 2019, 02:05 AM »
And you can make your own cheap boom arm from drain pipes.
Logged

Offline derekcohen

  • Posts: 452
    • In The Woodshop
Re: Vac hose driving me crazy
« Reply #10 on: February 28, 2019, 05:01 AM »
I hang mine from a hook attached to a ceiling beam.

Regards from Perth

Derek
Logged

Offline JimmyB1775

  • Posts: 31
Re: Vac hose driving me crazy
« Reply #11 on: March 28, 2019, 06:33 PM »
I let this get away from me. I originally had wrapped the hose in the braided finger trap material. It still got hung up. I have a canvas hose now and it still snags on any edge. I'm going to have to build a boom arm. That's all there is to it.

I considered making a 4 sided square hole with 1/2" PVC rollers on bolts for the hose to pass through and designing a clamp device to hold it to stuff. IDK. We'll see.
Logged
Pages: [1]   Go Up
« previous next »