Author Topic: TSO products DBF-45 helped with a specialized mortise  (Read 805 times)

0 Members and 1 Guest are viewing this topic.

Offline David Stanton

  • Festool Dealer Affiliate
  • *
  • Posts: 165
  • Carpenter & Joiner, Photographer, Youtuber.
    • David Stanton
Hi guys, been a while since I dropped in. I recently built a Lutyens bench and needed to create mortises with the domino at 84 degrees instead of the standard 90 degrees. This video shows how I used the TSO Products DBF-45 to achieve my goal. 
« Last Edit: May 15, 2021, 05:41 PM by David Stanton »
Click here for Dave Stanton on Youtube
KAPEX 120, ROTEX 150, TSC55, 800-1400-2700 TRACKS,  PDC 18-4 TEC, DOMINO XL, CXS, TXS, EHL 65, SYSLITE, HKC 55 EB, PSC 420 EB, CTL SYS, SYSROCK, 2 x CT 26, OF 1400, RTSC 400, OSC Vecturo 18V

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Crazyraceguy

  • Posts: 497
Re: TSO products DBF-45 helped with a specialized mortise
« Reply #1 on: May 15, 2021, 07:38 AM »
I saw the video this morning, before coming here. The thing I got from it was that someone should make a similar product that is tilt adjustable. Even if it was only a few degrees, maybe 10 or 15?
The extended cut depth capability of the DF700 makes large wedges possible, but something similar on a DF500 would have limitations.
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75

Offline ChuckM

  • Posts: 2704
Re: TSO products DBF-45 helped with a specialized mortise
« Reply #2 on: May 15, 2021, 10:19 AM »
I saw the video this morning, before coming here. The thing I got from it was that someone should make a similar product that is tilt adjustable. Snip.

Yeah. That'd make such an accessory more versatile.

Offline TSO_Products

  • Retailer
  • *
  • Posts: 370
    • TSO Products LLC
Re: TSO products DBF-45 helped with a specialized mortise
« Reply #3 on: May 15, 2021, 03:06 PM »

I saw the video this morning, before coming here. The thing I got from it was that someone should make a similar product that is tilt adjustable. Even if it was only a few degrees, maybe 10 or 15?
The extended cut depth capability of the DF700 makes large wedges possible, but something similar on a DF500 would have limitations.

@Crazyraceguy - we hear you and note your interest. The DF 700 community is not very vocal - at least not within our earshot. We would like to hear more while we are always working on refinements and expansion of our existing product lines.

What exactly would you you build using that capability?

info@tsoproducts.com
attention: Engineering