Author Topic: Confused on the ct hoses ?  (Read 657 times)

0 Members and 1 Guest are viewing this topic.

Offline festal

  • Posts: 342
Confused on the ct hoses ?
« on: May 08, 2022, 05:50 PM »
I’m trying to create a d27 pigtail to connect to my d36 hose but I’m a bit confused. Here is a tool end of my d36 newer style hose


And here is the older ribbed d27 hose that I have


What do I need to do to accomplish this?


Sent from my iPhone using Tapatalk

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Peter_C

  • Posts: 1378
Re: Confused on the ct hoses ?
« Reply #1 on: May 08, 2022, 06:01 PM »
Take off the big end of the D27 which can be done with a small screwdriver. Plug remaining part of it into the D36 hose end. That is how I use my D27 21" whip hose on the end of the boom arm with a D36 hose.

Another option is to purchase one of the newer vac side ends for the D27 hose that will allow the D36 tool end to plug into it.

Offline festal

  • Posts: 342
Re: Confused on the ct hoses ?
« Reply #2 on: May 08, 2022, 06:19 PM »
Take off the big end of the D27 which can be done with a small screwdriver. Plug remaining part of it into the D36 hose end. That is how I use my D27 21" whip hose on the end of the boom arm with a D36 hose.

Another option is to purchase one of the newer vac side ends for the D27 hose that will allow the D36 tool end to plug into it.
Like this?


Do you happen to have the part number for newer vac side connector?


Sent from my iPhone using Tapatalk

Offline festal

  • Posts: 342
Re: Confused on the ct hoses ?
« Reply #3 on: May 09, 2022, 02:21 PM »
Take off the big end of the D27 which can be done with a small screwdriver. Plug remaining part of it into the D36 hose end. That is how I use my D27 21" whip hose on the end of the boom arm with a D36 hose.

Another option is to purchase one of the newer vac side ends for the D27 hose that will allow the D36 tool end to plug into it.

Is This what i need to order?  https://www.amazon.com/Festool-204919-Rotating-Adapter-DAG-AS/dp/B07VFLHHV5