Author Topic: Sortainer inside dimensions  (Read 3651 times)

0 Members and 1 Guest are viewing this topic.

Offline Ned

  • Posts: 1146
Sortainer inside dimensions
« on: January 30, 2007, 10:51 AM »
All these dimensions are approximate.

All Sortainer drawers are 11 inches (280mm) front to back.

Small and medium drawers are 1-1/4 inches (32mm) deep.
Small drawers are 3-1/4 inches (83mm) wide.
Medium drawers are 6-5/8 inches (170 mm) wide.
Dividers can be fitted side-to-side, not front-to-back.

Large drawers are 3-3/8 inches (85mm) deep.
Large drawers are 3-5/8 inches (348mm) wide.
Dividers can be fitted front-to-back, not side-to-side.

External size:  All Sortainers sold in NA are the same size as a SYS 3.  In other markets Tanos offers a SYS 4 sized unit (2 small, 1 medium, and 2 large drawers) and a SYS 1 size (2 small, 1 medium).

IMO, the SYS 4 unit is the best choice as a tool box.  The SYS 1 would be great, I would think, attached beneath a jigsaw's Systainer.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.