« previous next »
Pages: [1]   Go Down

Author Topic: RS 2 owners in the US may need to paper-up.  (Read 2086 times)

0 Members and 1 Guest are viewing this topic.

Offline Cheese

  • Posts: 10745
RS 2 owners in the US may need to paper-up.
« on: March 21, 2021, 04:34 PM »
While we're all aware that the RS 2 has been discontinued in the US, I just noticed that the sandpaper for it is now no longer available on the Festool USA website.

498944-498954 Granat
499030-499037 Rubin 2

Also note that the sanding pads for the RS 2 are no longer available on the Festool USA website.

483679 Standard pad
485648 Non-marring pad

And the sanding pads are also not listed in EKAT.  [huh]



Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline RustE

  • Posts: 607
Re: RS 2 owners in the US may need to paper-up.
« Reply #1 on: March 21, 2021, 04:53 PM »
Hmm. Was this sander discontinued 10+ years ago?
Logged

Offline tsmi243

  • Posts: 416
Re: RS 2 owners in the US may need to paper-up.
« Reply #2 on: March 21, 2021, 05:09 PM »
Thanks for the tip

RS2E was discontinued about a year ago, in the US. 
Logged

Offline guybo

  • Posts: 547
Re: RS 2 owners in the US may need to paper-up.
« Reply #3 on: March 21, 2021, 06:58 PM »
FWIW, festool sells 230x280 sheets of granat(9x11  for us yanks), they also sell 481523 a hole punch for the half sheet sander,festoolproducts has one listed. guy
« Last Edit: March 21, 2021, 07:18 PM by guybo »
Logged

Offline rst

  • Posts: 2991
Re: RS 2 owners in the US may need to paper-up.
« Reply #4 on: March 21, 2021, 08:11 PM »
The Makita equivalent has the same hole pattern...I have both
Logged

Offline rvieceli

  • Posts: 1979
Re: RS 2 owners in the US may need to paper-up.
« Reply #5 on: March 21, 2021, 08:46 PM »
Yup and the Makita is half the price.
Logged

Offline Alanbach

  • Posts: 758
Re: RS 2 owners in the US may need to paper-up.
« Reply #6 on: March 22, 2021, 01:23 AM »
@Shane Holland - Is this correct? Are the Granat sheets for the RS2 being discontinued? Can you shed some light in this?
Logged

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 11153
    • The Tool Nut's Festool Store
Re: RS 2 owners in the US may need to paper-up.
« Reply #7 on: March 22, 2021, 08:54 AM »
@Alanbach has not reported the RS2 abrasives to be discontinued. We still have them listed with many items in stock, although there are some on backorder.

https://www.festoolproducts.com/accessories/sanders/abrasives/rs-2-e-abrasives.html

The RS2 sandpaper hole punch (481523) has been discontinued and removed from our website. @guybo

Thanks,
Shane
Logged
The Tool Nut
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
ToolNut.com
877-866-5688

Offline luvmytoolz

  • Posts: 709
Re: RS 2 owners in the US may need to paper-up.
« Reply #8 on: March 16, 2023, 07:14 AM »
I know it's an old thread but does anyone here know if the RS2E base/pad use the same screw placement as the RS100, RS200 and RS2?

I bought a replacement pad (suitable for the RS100/200, RS2 as I was of the understanding it also matched the RS2E) for my roughly 40 year old first model RS2E, but the outer 4 corner screws holes are 5mm closer than the matching hole threads on the sanders base. The pad is 181mm centers while the sander is 186mm centers.

A chat online with Festool Aus said it was compatible, but I'm dubious as my RS2E also has 2 screw pillars centered on the long plane about 80mm or so apart which this pad doesn't have.

I wonder if the RS2E design changed at some point altering the screw placement?
Logged
Pages: [1]   Go Up
« previous next »