Author Topic: New tools for 2019 including CTM Midi and Kapex updates among others  (Read 96650 times)

0 Members and 1 Guest are viewing this topic.

Offline ProtradeUK

  • Posts: 2
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #300 on: November 21, 2019, 12:11 PM »
Yes Amcore new cell design, same as idea as Milwaukee High output and Metabo LiHD. 50% smaller than a 5ah, 20% lighter and only a 20% drop in runtime compared to a 5ah.
Glad you liked my picture!

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline amcore

  • Posts: 45
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #301 on: November 21, 2019, 12:24 PM »
Yes Amcore new cell design, same as idea as Milwaukee High output and Metabo LiHD. 50% smaller than a 5ah, 20% lighter and only a 20% drop in runtime compared to a 5ah.
Glad you liked my picture!

Thanks for that :).. good they follow the stream and not put out old cells!
yes i liked it alot   ;D
Festool addicted!

Offline mrB

  • Posts: 712
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #302 on: November 21, 2019, 07:07 PM »
Ooh I love small cells !
there's nothing like the right tool for the job

Offline amcore

  • Posts: 45
Festool addicted!

Offline tobiaskurz

  • Posts: 18
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #304 on: December 02, 2019, 12:24 PM »
festool released a german video from the new TKS 80:

Edit: fostool uk has an english version:
« Last Edit: December 02, 2019, 12:28 PM by tobiaskurz »

Offline Gregor

  • Posts: 1712
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #305 on: December 08, 2019, 12:21 PM »
festool released ... video
Both videos have been set to private, french one is still available:

« Last Edit: December 08, 2019, 12:24 PM by Gregor »

Offline GarryMartin

  • Posts: 1854
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #306 on: February 01, 2020, 05:03 AM »
After the embargo until 1st February, there are now more details and images emerging on the TID 18.

  • 18V battery
  • Gears 3 + T-mode
  • Idle engine speed - 1st/2nd/3rd gear 0–1200/0–2000/0–3200 rpm
  • Max. no. of strokes 4500 rpm
  • Max. torque 180 Nm
  • Max. screw size 8 x 220 mm (in softwood)
  • Tool holder 1/4"
  • Li-Ion battery capacity Battery 3.1/4.0 Ah
  • Weight with battery 1.3/1.5 kg








Offline Duck76

  • Posts: 26
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #307 on: February 10, 2020, 11:08 PM »
Any word/rumours on when/if the 4.0Ah battery will be available in North America?

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10936
    • The Tool Nut's Festool Store
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #308 on: February 10, 2020, 11:29 PM »
Any word/rumours on when/if the 4.0Ah battery will be available in North America?

While it's very likely that we will get the 4.0Ah battery, no official word yet. Generally, NA gets new products around 6-12 months after Europe.
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688

Offline azaffer

  • Posts: 5
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #309 on: March 12, 2020, 08:39 PM »
Any word/rumours on when/if the 4.0Ah battery will be available in North America?

While it's very likely that we will get the 4.0Ah battery, no official word yet. Generally, NA gets new products around 6-12 months after Europe.

Do you mean being able to purchase it individually? Because it looks like N.A. should be getting a couple sets with the 4.0 Ah batteries included by next month. https://www.festool.com/products/drilling-and-screwdriving/cordless-impact-drill/576482---tid-18-hpc4,0-i-plus#Overview

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10936
    • The Tool Nut's Festool Store
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #310 on: March 12, 2020, 08:57 PM »
Do you mean being able to purchase it individually? Because it looks like N.A. should be getting a couple sets with the 4.0 Ah batteries included by next month. https://www.festool.com/products/drilling-and-screwdriving/cordless-impact-drill/576482---tid-18-hpc4,0-i-plus#Overview

Welcome to the forum, @azaffer. The festool.com is an international website and has plenty of products that are currently not available in North America and some that will never appear in North America. There are currently no indications from Festool USA, including on festoolusa.com, that the introduction of these batteries is imminent. However, that can change at any time.

Like I said, I would expect we see them this year, but the question is when.

Shane
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688

Offline azaffer

  • Posts: 5
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #311 on: March 12, 2020, 11:36 PM »
Do you mean being able to purchase it individually? Because it looks like N.A. should be getting a couple sets with the 4.0 Ah batteries included by next month. https://www.festool.com/products/drilling-and-screwdriving/cordless-impact-drill/576482---tid-18-hpc4,0-i-plus#Overview

Welcome to the forum, @azaffer. The festool.com is an international website and has plenty of products that are currently not available in North America and some that will never appear in North America. There are currently no indications from Festool USA, including on festoolusa.com, that the introduction of these batteries is imminent. However, that can change at any time.

Like I said, I would expect we see them this year, but the question is when.

Shane


Thanks Shane. Did not realize it was an international site, especially given existing country-specific domains (.de, .co.uk, etc.).

Offline azaffer

  • Posts: 5
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #312 on: April 29, 2020, 01:13 PM »
Do you mean being able to purchase it individually? Because it looks like N.A. should be getting a couple sets with the 4.0 Ah batteries included by next month. https://www.festool.com/products/drilling-and-screwdriving/cordless-impact-drill/576482---tid-18-hpc4,0-i-plus#Overview

Welcome to the forum, @azaffer. The festool.com is an international website and has plenty of products that are currently not available in North America and some that will never appear in North America. There are currently no indications from Festool USA, including on festoolusa.com, that the introduction of these batteries is imminent. However, that can change at any time.

Like I said, I would expect we see them this year, but the question is when.

Shane

Looks like it’s finally coming to the US! Shane do you have any pricing info on the sets and kits?


Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10936
    • The Tool Nut's Festool Store
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #313 on: April 29, 2020, 01:15 PM »
Looks like it’s finally coming to the US! Shane do you have any pricing info on the sets and kits?

@azaffer YES! See our website or this thread with the announcement for more details. Pricing starting at $199, ships on July 1st.
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688

Offline azaffer

  • Posts: 5
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #314 on: April 29, 2020, 01:16 PM »
Thanks Shane! So excited.

Offline elfick

  • Posts: 583
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #315 on: April 29, 2020, 01:20 PM »
I didn't investigate this tool because I figured it would be at least a year before it got to the US, but has there been any discussion about why the TID is better than other brands' impact drivers? (Other than it is Festool and uses the same batteries). In particular, I'm curious about how loud it is compared to other impacts, specifically the "Surge" type hydraulic impacts. Thanks!

Offline NChander

  • Posts: 27
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #316 on: April 29, 2020, 01:59 PM »
Dumb question, but will my c18 battery fit the new T18.

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10936
    • The Tool Nut's Festool Store
Re: New tools for 2019 including CTM Midi and Kapex updates among others
« Reply #317 on: April 29, 2020, 02:00 PM »
Dumb question, but will my c18 battery fit the new T18.

@NChander

Yes, all flat pack 18v Festool batteries are interchangeable and compatible with all 18v Festool cordless tools.

The exception is the special batteries for the cordless sanders, which are not "flat pack" batteries.
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688

Offline azaffer

  • Posts: 5
Looks like it’s finally coming to the US! Shane do you have any pricing info on the sets and kits?

@azaffer YES! See our website or this thread with the announcement for more details. Pricing starting at $199, ships on July 1st.

Hey Shane, I was about to order the 4 piece Pro finish kit. Are you guys still on track to ship 7/1?

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10936
    • The Tool Nut's Festool Store
Hey Shane, I was about to order the 4 piece Pro finish kit. Are you guys still on track to ship 7/1?

@azaffer Festool has not communicated any delays at this time, so the ship date is still 7/1.
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688

Offline amcore

  • Posts: 45
Festool has just annonce this!
Its a brand new product that they dont have yet..

What do you think it is?

Festool addicted!