Author Topic: New tools being released in the fall  (Read 5313 times)

0 Members and 1 Guest are viewing this topic.

Offline JG

  • Posts: 43
New tools being released in the fall
« on: September 02, 2021, 11:55 AM »


Video shows new tools and accessories being released in the fall. Not sure if being released in NA as well.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline JG

  • Posts: 43
Re: New tools being released in the fall
« Reply #1 on: September 02, 2021, 11:57 AM »
Link for video did not post but video is entitled

New Products Fall 2021 with Nadja & Georg (Recording of the live session...

Offline Cheese

  • Posts: 8906
Re: New tools being released in the fall
« Reply #2 on: September 02, 2021, 12:07 PM »

Offline Alex

  • Posts: 7665
Re: New tools being released in the fall
« Reply #3 on: September 02, 2021, 12:31 PM »

Offline Jason Hagen

  • Posts: 35
New tools being released in the fall
« Reply #4 on: September 02, 2021, 01:22 PM »
I wonder if they will release this stuff in the US.


Sent from my iPhone using Tapatalk
« Last Edit: September 02, 2021, 01:45 PM by Jason Hagen »

Offline Coen

  • Posts: 1092
Re: New tools being released in the fall
« Reply #5 on: September 02, 2021, 01:30 PM »
28 minutes !? darn. Truly the new YouTube where information density approaches zero.

Let's conclude;
0 - 1 minutes; skip (1)
1 - 2 minutes; new rail with Systainer-handle hole
2 - 3 minutes; ^ in two sizes!
3 - 4 minutes; rail has more holes for sticky pads
4 - 5 minutes; demonstration of sticky pads
5 - 6 minutes; actually using the rail with sticky pads and track saw
6 - 7 minutes; "the sticky pads are awesome"
7 - 8 minutes; more holes in the rail; for screws
8 - 9 minutes; "system around the guiderails"
9 - 10 minutes; the new adjustable angle stop
10 - 11 minutes; live demonstration of said angle stop (you can clamp it!)
11 - 12 minutes; angle stop has extensions for sheets with non-flat sides
12 - 13 minutes; "
13 - 14 minutes; 'parallel' side extension also available
14 - 15 minutes; "
15 - 16 minutes; THE NEW RAIL CONNECTORS!!!!! (Also: seems Festool is into cutting guiderails into custom lengts too!)
16 - 17 minutes; demonstration of new connectors
17 - 18 minutes; "
18 - 19 minutes; The new hose/cable deflector
19 - 20 minutes; 'lets walk a few meters to the new OF1010'
20 - 21 minutes; New OF1010 has new round bajonet dust extractor connection, fits D36 hose too
21 - 22 minutes; New OF1010 has clamps on both columns when you fix the depth
22 - 23 minutes; New OF1010 has moved columns... giving better access to the bit
23 - 24 minutes; ^demonstration of..
24 - 25 minutes; skip... while they use the router to make a tiny 10mm groove
25 - 26 minutes; skip...
26 - 27 minutes; skip...
27 - 28 minutes; skip... but visit the Festool website


I hate to break it... but Bosch' video was better. For one because it had a nice list of the contents in the description with direct time-stamp links.
« Last Edit: September 02, 2021, 01:32 PM by Coen »

Offline Alex

  • Posts: 7665
Re: New tools being released in the fall
« Reply #6 on: September 02, 2021, 01:43 PM »
Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

Offline ChuckS

  • Posts: 2885
Re: New tools being released in the fall
« Reply #7 on: September 02, 2021, 01:49 PM »
28 minutes !? darn. Truly the new YouTube where information density approaches zero.


Thank you for the list...! It saved me from watching the video as nothing there was of interest to me.

Offline Coen

  • Posts: 1092
Re: New tools being released in the fall
« Reply #8 on: September 02, 2021, 02:26 PM »
Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;


With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)
« Last Edit: September 02, 2021, 02:30 PM by Coen »

Offline Jason Hagen

  • Posts: 35
Re: New tools being released in the fall
« Reply #9 on: September 02, 2021, 02:32 PM »
Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;


With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)
Why can’t they include the quick lever clamps! So much faster!


Sent from my iPhone using Tapatalk

Offline zapdafish

  • Posts: 610
Re: New tools being released in the fall
« Reply #10 on: September 02, 2021, 03:15 PM »

keep waiting for them to clap their hands and say, were gonna pump you up
CT22, TS55, Kapex, RO150, Domino, RS 2 E

Offline Coen

  • Posts: 1092
Re: New tools being released in the fall
« Reply #11 on: September 02, 2021, 03:34 PM »
Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

Offline Jason Hagen

  • Posts: 35
Re: New tools being released in the fall
« Reply #12 on: September 02, 2021, 04:38 PM »
Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

That wasn’t in the video!


Sent from my iPhone using Tapatalk

Offline Picktool

  • Posts: 146
Re: New tools being released in the fall
« Reply #13 on: September 02, 2021, 05:43 PM »
you mean...

keep waiting for them to clap their hands and say, were gonna pump you up

gah... 34yrs ago
Well Dogey

Offline Cheese

  • Posts: 8906
Re: New tools being released in the fall
« Reply #14 on: September 02, 2021, 07:48 PM »
28 minutes !? darn. Truly the new YouTube where information density approaches zero.

I hate to break it... but Bosch' video was better. For one because it had a nice list of the contents in the description with direct time-stamp links.

Ya, this Festool video is painful to watch in its entirety.

The neat thing about the rail sticky inserts is that they're a tiny bit longer than the slot so when you insert them, the insert cups slightly and prevents the adhesive from touching the wood. You can slide the rail into position and when it's where you want it, you push down the sticky inserts and they then adhere to the wood.
« Last Edit: September 02, 2021, 07:51 PM by Cheese »

Offline Coen

  • Posts: 1092
Re: New tools being released in the fall
« Reply #15 on: September 03, 2021, 11:09 AM »
Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

That wasn’t in the video!


Sent from my iPhone using Tapatalk

True, that too wasn't in the video  [wink]

Offline usernumber1

  • Posts: 181
Re: New tools being released in the fall
« Reply #16 on: September 03, 2021, 04:02 PM »
i watched it at 2x playback speed. it was still awkward and too long

Offline elfick

  • Posts: 639
Re: New tools being released in the fall
« Reply #17 on: September 03, 2021, 06:41 PM »
Yeahh ...... not really impressed here either, slightly adapted rail, slightly adapted router ..... wait, that's it?

The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;


With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)
This set should have included the FS-Rapid Clamp (489790) to make it truly guide rail focused.

Offline Jason Hagen

  • Posts: 35
Re: New tools being released in the fall
« Reply #18 on: September 03, 2021, 06:56 PM »
The angle stop is nice and I think the new rail connectors might be awesome. Don't care about the other stuff either but it's nice to see some incremental improvements. Every brand does some of that. Like the *new* Bosch GCG 18v-310 is just that Bosch sells another combination of parts made by Cox.  [tongue]

There is also a new set that they said nothing about;


With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)

This looks a lot like this kit 497657. Except no splitter guide and angle gauge is updated.

Offline mcooley

  • Posts: 269
Re: New tools being released in the fall
« Reply #19 on: September 03, 2021, 08:56 PM »
Are the adhesive inserts for the rail reusable for a number of cuts and if so about how many? I presume they are etc.

Curious about the rail connectors and how much better they keep the joining rails square.

As for the video I agree Festool so often seems to be in the dark when it comes to presenting their products in a more compelling fashion. Not looking for anything flashy but more informative and a contemporary form. This video feels like a US infomercial.


Offline squall_line

  • Posts: 776
Re: New tools being released in the fall
« Reply #20 on: September 03, 2021, 09:37 PM »
With yet another two screwclamps that almost nobody wants, lol.

Also; how on earth does this need a Sys3 M 137 ???  [huh] I'd say this fits perfectly fine in a M 112 (Systainer-I size)

This looks a lot like this kit 497657. Except no splitter guide and angle gauge is updated.

Correct, it's an updated version of the FS/2 Guide Rail Accessory Kit.

My question is will they also update the MFT/3 Set to include these upgraded accessories, or stick with what they have right now?  Based on the price increases on the tools for later this year, I have a bad feeling the MFT/3 with these upgrades will jump from $735 to $750 or even $775.

Offline Coen

  • Posts: 1092
Re: New tools being released in the fall
« Reply #21 on: September 04, 2021, 08:15 AM »
The MFT set (#201311) was always a limited edition, released twice, right?

Yes, updated version, but the original included a 1400mm spare splinter strip and enough free space for a lot od extra stuff. I had the jigsaw guiderail adapter plate in it, a Toolie and two 300mm clamps.

And all in 25mm less wasted space.
« Last Edit: September 04, 2021, 08:17 AM by Coen »

Offline elfick

  • Posts: 639
Re: New tools being released in the fall
« Reply #22 on: September 05, 2021, 07:27 PM »
Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

That wasn’t in the video!


Sent from my iPhone using Tapatalk

True, that too wasn't in the video  [wink]
BTW, this is already showing up on FestoolUSA for $299
SYS-MFT Fixing-Set SYS3 M 112 MFT-FX

Offline ChuckS

  • Posts: 2885
Re: New tools being released in the fall
« Reply #23 on: September 05, 2021, 08:06 PM »
The low profile stops are a versatile accessory. I use this Canadian product (released almost 10 years ago) a lot in the domino-mortising operation in addition to handlplaning tasks: https://www.leevalley.com/en-ca/shop/tools/workshop/workbenches/benchtop-accessories/69837-veritas-planing-stop

Offline Jason Hagen

  • Posts: 35
Re: New tools being released in the fall
« Reply #24 on: September 05, 2021, 10:01 PM »
Yeah, the screw clamps are already in the original FS-SYS/2 set, the LR-32 set and also Bessey's MFT clamp set. Festool had the rapid clamps in the limited edition #201311

But now also in this #577131;

That wasn’t in the video!


Sent from my iPhone using Tapatalk

True, that too wasn't in the video  [wink]
BTW, this is already showing up on FestoolUSA for $299
SYS-MFT Fixing-Set SYS3 M 112 MFT-FX
I can’t find any dealers in the USA that are selling it yet.


Sent from my iPhone using Tapatalk

Offline Twst

  • Posts: 2
Re: New tools being released in the fall
« Reply #25 on: September 06, 2021, 01:13 AM »
I fond the new limited ratchet set interesting [smile]
335479-0
335481-1

Offline Cheese

  • Posts: 8906
Re: New tools being released in the fall
« Reply #26 on: September 06, 2021, 09:35 AM »

I can’t find any dealers in the USA that are selling it yet.


Well it is on Festool's website so you should be able to have say, Woodcraft order it for you.

https://www.festoolusa.com/products/new-tools/new-tools/577131---sys3-m-112-mft-fx#Overview

Offline elfick

  • Posts: 639
Re: New tools being released in the fall
« Reply #27 on: September 06, 2021, 11:46 AM »
I can’t find any dealers in the USA that are selling it yet.

Same here.
@Shane Holland - any insight into 577131 SYS-MFT Fixing-Set SYS3 M 112 MFT-FX ?

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 11060
    • The Tool Nut's Festool Store
Re: New tools being released in the fall
« Reply #28 on: September 06, 2021, 11:49 AM »
@Shane Holland - any insight into 577131 SYS-MFT Fixing-Set SYS3 M 112 MFT-FX ?

@elfick Funny, I just had an email inquiry about this item from @ADKMedic.

Germany manages the Festool USA website and I think this is a mistake. This product is not currently being offered in the U.S. market and there's no indication that it will be at this time. Let me ping the guys over at FUSA and see what they say. I'll update you guys tomorrow when they're back in the office.

ETA - The same is true with all of the items in this thread. No announcement at this time that these will be offered in the U.S.

Thanks,
Shane
« Last Edit: September 06, 2021, 12:10 PM by Shane Holland »
The Tool Nut
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
ToolNut.com
877-866-5688

Offline elfick

  • Posts: 639
Re: New tools being released in the fall
« Reply #29 on: September 06, 2021, 11:57 AM »
@Shane Holland - any insight into 577131 SYS-MFT Fixing-Set SYS3 M 112 MFT-FX ?

@elfick Funny, I just had an email inquiry about this item from @ADKMedic.

Germany manages the Festool USA website and I think this is a mistake. This product is not currently being offered in the U.S. market and there's not been any indication that it will be at this time. Let me ping the guys over at FUSA and see what they say. I'll update you guys tomorrow when they're back in the office.

Thanks,
Shane
Thanks Shane! Really appreciate you looking into it. You rock!

Offline Cheese

  • Posts: 8906
Re: New tools being released in the fall
« Reply #30 on: September 06, 2021, 12:19 PM »
Germany manages the Festool USA website and I think this is a mistake. This product is not currently being offered in the U.S. market and there's no indication that it will be at this time. Let me ping the guys over at FUSA and see what they say. I'll update you guys tomorrow when they're back in the office.

Hey Shane, this is directly from the Festool USA web site.

Festool United States>Products>New Tools>New Tools>SYS-MFT Fixing-Set SYS3 M 112 MFT-FX

https://www.festoolusa.com/products/new-tools/new-tools/577131---sys3-m-112-mft-fx#Overview

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline squall_line

  • Posts: 776
Re: New tools being released in the fall
« Reply #31 on: September 06, 2021, 12:27 PM »
As Shane mentioned, der Fatherland manages the FUSA website instead of FUSA staff.  I personally harbor no illusions that this set will actually be released in the United States.  Frankly, any time I see a blue Systainer offering, I immediately write it off as "not coming to the USA" (Emerald Edition excepted since that was literally a USA Emerald Anniversary).

If it is released, it will be a "limited edition" that will sell out immediately at the major online retailers, be listed for 50% over MSRP on eBay, and 10% of the nation's stock will be found collecting dust 3 years from now in the back storage room of retailers like Acme Tools, and AmazonUK and Amazon.de will refuse to ship it overseas at any price.

I think the MFT accessory set will eventually see the update, but possibly not until 2023 or 2024 when they update the MFT/3 Set and bump the price to $800.

Offline Cheese

  • Posts: 8906
Re: New tools being released in the fall
« Reply #32 on: September 06, 2021, 12:31 PM »
As Shane mentioned, der Fatherland manages the FUSA website instead of FUSA staff.  I personally harbor no illusions that this set will actually be released in the United States. 

Well, here's hoping that you and Shane are both wrong.  [smile]  [poke]

No UL approvals needed here.  [tongue]

Offline Crazyraceguy

  • Posts: 695
Re: New tools being released in the fall
« Reply #33 on: September 06, 2021, 03:58 PM »
I would be interested in getting one of those too.
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 11060
    • The Tool Nut's Festool Store
Re: New tools being released in the fall
« Reply #34 on: September 07, 2021, 09:08 AM »
@elfick @ADKMedic I received confirmation from FUSA this morning that the listing of this product on the festoolusa.com website was in error. This product is not available in the U.S. at this time, and no according to them "no plans" at this time for it to be released in the U.S. market. Sorry for the bad news.
The Tool Nut
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
ToolNut.com
877-866-5688

Offline elfick

  • Posts: 639
Re: New tools being released in the fall
« Reply #35 on: September 07, 2021, 10:50 AM »
@elfick @ADKMedic I received confirmation from FUSA this morning that the listing of this product on the festoolusa.com website was in error. This product is not available in the U.S. at this time, and no according to them "no plans" at this time for it to be released in the U.S. market. Sorry for the bad news.
@Shane Holland That's a bummer but unfortunately not really surprising. Thanks for checking on it for us!