Author Topic: MW 1000 US Availability?  (Read 7906 times)

0 Members and 1 Guest are viewing this topic.

Online PeterJJames13

  • Posts: 161
Re: MW 1000 US Availability?
« Reply #30 on: January 07, 2019, 12:16 PM »
Beware that shipping is VERY slow doing this. They ship using DHL Paket. I'm at 3 weeks and no sign of it yet......

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline JPCleary

  • Posts: 25
Re: MW 1000 US Availability?
« Reply #31 on: January 25, 2019, 04:56 PM »
Beware that shipping is VERY slow doing this. They ship using DHL Paket. I'm at 3 weeks and no sign of it yet......

I hear that...ordered one from Germany off a seller on eBay which went through DHL in mid-December and just got it a couple of days ago.
Not a professional, just a DIY festfool with apparently too much money on his hands -- Kapex120 | TS75 | OF1400 | CT26 | ETS EC125 | Carvex PS420 | CXS | Vecturo | MW 1000 | x2 MFT3 | UG Stand w/ wings

Offline JPCleary

  • Posts: 25
Re: MW 1000 US Availability?
« Reply #32 on: January 25, 2019, 04:59 PM »
I finally gave in and paid the stupid amount of money I paid to order one from a German eBay seller and naturally they announce a US launch date a couple of days after I finally get the dang thing...lol!😂🤣
Not a professional, just a DIY festfool with apparently too much money on his hands -- Kapex120 | TS75 | OF1400 | CT26 | ETS EC125 | Carvex PS420 | CXS | Vecturo | MW 1000 | x2 MFT3 | UG Stand w/ wings

Offline Romanf345

  • Posts: 12
Re: MW 1000 US Availability?
« Reply #33 on: January 25, 2019, 09:15 PM »
Just got an email from a festool dealer and this unit will be avaiable in the USA in April
Roman

Offline Bob D.

  • Posts: 1292
Re: MW 1000 US Availability?
« Reply #34 on: January 25, 2019, 09:33 PM »
Just got an email from a festool dealer and this unit will be avaiable in the USA in April

While I hope it is true please notice the date...April 1st.

Just saying this might be too good to be true.  [unsure]
-----
It's a table saw, do you know where your fingers are?

Offline Romanf345

  • Posts: 12
Re: MW 1000 US Availability?
« Reply #35 on: January 25, 2019, 09:52 PM »
Well they are taking orders so I hope they are not pulling a prank🤡
« Last Edit: January 25, 2019, 10:37 PM by Romanf345 »
Roman

Offline Don T

  • Posts: 1889
  • Phoenix, Az
Re: MW 1000 US Availability?
« Reply #36 on: January 25, 2019, 10:36 PM »
Just got an email from a festool dealer and this unit will be avaiable in the USA in April

While I hope it is true please notice the date...April 1st.

Just saying this might be too good to be true.  [unsure]
No, it is not a prank.  I was told at Festool connect that it would be available in April of 2019.
RO150, C12, DF 500 Q, CT33, TS75, MFT3, Kapex 120, MFT3/Kapex, MFK 700, RO 90, ETS150/3, CT22, Centrotec Installers Kit, Parallel Guides & Ext, Carvex, OF1400, LR32 Set, MFS400 w/700 rails, KA UG Set, First Aid Kit, RTS 400 EQ, Vecturo OS400 Set, CT Wings, CT Drill Guide, Pro 5, CXS, C18, HL850, Vac Sys set

Online PeterJJames13

  • Posts: 161
Re: MW 1000 US Availability?
« Reply #37 on: January 26, 2019, 08:23 PM »
Beware that shipping is VERY slow doing this. They ship using DHL Paket. I'm at 3 weeks and no sign of it yet......

I hear that...ordered one from Germany off a seller on eBay which went through DHL in mid-December and just got it a couple of days ago.
Same. I think I ordered the first week of December and got mine about a week and a half ago. Well worth the wait. The worst part is worrying about damage in transit, but that's the risk one takes when ordering overseas. Luckily it was packed well and there were no issues. I think I'll use the extension table more than the actual cart. I may order another extension table in April.

Sent from my SM-N960U using Tapatalk


Online PeterJJames13

  • Posts: 161
Re: MW 1000 US Availability?
« Reply #38 on: January 26, 2019, 08:25 PM »
I finally gave in and paid the stupid amount of money I paid to order one from a German eBay seller and naturally they announce a US launch date a couple of days after I finally get the dang thing...lol!
I have the same luck, but I'm really glad they're bringing this across the pond. No electric issues to worry about so it just makes sense. I've already gotten some great use out of mine. Between this and a Shaper Origin I feel like I have a CNC which is easily portable when needed (among other things).

Sent from my SM-N960U using Tapatalk


Offline Bob D.

  • Posts: 1292
Re: MW 1000 US Availability?
« Reply #39 on: January 27, 2019, 07:24 AM »
Well they are taking orders so I hope they are not pulling a prank🤡

That's good news. I suspected that was the case but the coincidence was too good to pass up commenting on.
-----
It's a table saw, do you know where your fingers are?

Offline jarbroen

  • Posts: 147
Re: MW 1000 US Availability?
« Reply #40 on: January 28, 2019, 11:44 AM »
I was discouraged by the price.  $650 for the set is a little steep for me.  It just wouldn't provided added value.
If I only had one MFT I could maybe see buying the MW1000 as my second, but 2 MFT's provide a lot more workspace for the price.

Offline Shane Holland

  • Festool Dealer
  • *
  • Posts: 10682
    • The Tool Nut's Festool Store
Re: MW 1000 US Availability - Preorder Now from Tool Nut
« Reply #41 on: January 28, 2019, 12:49 PM »
I can confirm that it's available beginning 4/1 in the US. We are currently accepting pre-orders.

Festool MW 1000 Mobile Workshop
« Last Edit: January 28, 2019, 12:51 PM by Shane Holland »
Buy Festool Online" class="bbc_img
Fast, Free Shipping - Festool Trained Experts - Unparalleled Customer Service
Toolnut.com and FestoolProducts.com
877-866-5688