« previous next »
Pages: [1]   Go Down

Author Topic: Kapex KS-60  (Read 1982 times)

0 Members and 1 Guest are viewing this topic.

Offline Bucky49

  • Posts: 2
Kapex KS-60
« on: May 03, 2021, 01:33 AM »
G’day,
I have a Kapex 60 and needing a new blade. In Australia Festool not only want an arm and leg but my left testicle too. Does anyone know what alternatives there are? I have tried google without any success, plenty for the Kapex 120.

Cheers Bucky
Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline CeeJay

  • Posts: 439
Re: Kapex KS-60
« Reply #1 on: May 03, 2021, 02:40 AM »
Timbecon do a Torquata 220mm blade which should fit a KS60 I think.


Sent from my iPhone using Tapatalk
Logged

Offline Alex

  • Posts: 7802
Re: Kapex KS-60
« Reply #2 on: May 03, 2021, 10:24 AM »
Logged

Offline Bucky49

  • Posts: 2
Re: Kapex KS-60
« Reply #3 on: May 03, 2021, 06:33 PM »
Thanks for the replies. I was under the impression that circular saw blades were not recommended for the Kapex mitre saw. Now to decide what one or ones to get.
Logged

Offline Alex

  • Posts: 7802
Re: Kapex KS-60
« Reply #4 on: May 04, 2021, 01:58 AM »
Quote from: Bucky49 on May 03, 2021, 06:33 PM
I was under the impression that circular saw blades were not recommended for the Kapex mitre saw.

Oh. How's that?
Logged

Offline Doug S

  • Posts: 544
Re: Kapex KS-60
« Reply #5 on: May 04, 2021, 04:02 AM »
Quote from: Alex on May 04, 2021, 01:58 AM
Quote from: Bucky49 on May 03, 2021, 06:33 PM
I was under the impression that circular saw blades were not recommended for the Kapex mitre saw.

Oh. How's that?

Blades for circular saws and table saws have positive rake teeth so they pull the wood down to the table.

Blades for mitre saws and radial arm saws should have negative rake teeth, this pushes the stock down and back to the fence.

If you use a positive rake in a mitre saw the cutting action makes the blade want to come towards you.

If you use a negative rake in a table saw it wants to push the stock back to you.

I haven't really explained it very well but that's the theory.

Logged

Offline Alex

  • Posts: 7802
Re: Kapex KS-60
« Reply #6 on: May 04, 2021, 04:44 AM »
Thanks Doug, I think you explained it pretty well.

I always thought that a small positive rake in a miter saw was also ok. But I must say, I do not have a lot of experience with miter saws.

Anyway, if the Australian links aren't interesting, the Dutch site I linked to has plenty of options. No need to be constrained by country borders these days.
Logged

Offline fuzzy logic

  • Posts: 383
Re: Kapex KS-60
« Reply #7 on: May 04, 2021, 05:30 AM »
Guess that first need to establish what the hook angle, tooth count, what type / depth of carbide etc is used by the Festool blade(s). 

Then carefully check the spec's of the blades, from other sources, are exactly what you are looking for. 

Richard (UK)
Logged
Decent people do the right thing - always?
Pages: [1]   Go Up
« previous next »