Author Topic: How do I identify these hoses?  (Read 365 times)

0 Members and 1 Guest are viewing this topic.

Offline RonMiller

  • Posts: 327
How do I identify these hoses?
« on: September 22, 2022, 11:04 AM »
I have three anti-static hoses I want to identify with part numbers or proper descriptions if possible so that I can sell them.

1. The third is piece of larger hose (50 mm?) left over from making my Kapex to CT33 connection a few years ago. No ends, just 68" of hose.
2. The second a standard tool to CT connection with both ends on. The CT end is angled 90 degrees.
3. The first is a large size hose, 3.5 meters with both larger ends on.

Can anyone point me to a site with older part numbers or does anyone have more specific information?

Thanks in advance.
Ron

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Online squall_line

  • Posts: 1514
Re: How do I identify these hoses?
« Reply #1 on: September 26, 2022, 10:38 PM »
The second one looks just like the hose from my older style CT-MINI.  The MIDI probably used the same 90-degree connector at the vac end.

Offline Coen

  • Posts: 1805
Re: How do I identify these hoses?
« Reply #2 on: Yesterday at 08:24 PM »
I have three anti-static hoses I want to identify with part numbers or proper descriptions if possible so that I can sell them.

1. The third is piece of larger hose (50 mm?) left over from making my Kapex to CT33 connection a few years ago. No ends, just 68" of hose.
2. The second a standard tool to CT connection with both ends on. The CT end is angled 90 degrees.
3. The first is a large size hose, 3.5 meters with both larger ends on.

Can anyone point me to a site with older part numbers or does anyone have more specific information?

Thanks in advance. (Attachment Link) (Attachment Link) (Attachment Link)

No idea why you ask in reverse... but I'll bite;

The first picture, definitely this one;
Saugschlauch D 36 Antistatik mit Drehausgleich und Anschlussmuffe, Durchmesser 36 mm, Länge 3,5 m 452882

The second picture, not completely sure. Is it 3.5m? Or 3m?
Saugschlauch D 32/27 Antistatik für CTL MINI/MIDI, mit Winkel-Drehausgleich saugerseitig, temperaturbeständig
bis + 70 °C, Ableitwiderstand (DIN IEC 312) < 10 MΩ/m, Durchmesser 32/27 mm,
Länge 3,5 m, im Karton 499742

The third picture;
Saugschlauch D 50 Antistatik Meterware (ohne Drehausgleich und Anschlussmuffe), Länge 1 m 452386, but then x1.7