« previous next »
Pages: [1]   Go Down

Author Topic: OF 1400 - Broken Stop: Fix or Replace?  (Read 1403 times)

0 Members and 1 Guest are viewing this topic.

Offline 4nthony

  • Posts: 598
    • Slack for Recon Tools
OF 1400 - Broken Stop: Fix or Replace?
« on: May 22, 2023, 02:07 PM »
I broke one of the stops on my OF 1400. I hit it with the wrench with loosening the collet.

Would something like 4 minute epoxy work to glue the post?



Otherwise, from where is everyone ordering their spare parts? The Festool Spare Parts Dept 800 number? I've found it online at various prices from retailers I'm not familiar with:

M&M Tool Parts
Tool Parts Pro
Ultimate Tools

Cheers,
Anthony
Logged
Recon Tool Notifications

Anthony

"The best way to get a correct answer on the internet is to post an obviously wrong answer and wait for someone to correct you." - Kevin Kelly
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Richard/RMW

  • Posts: 2651
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #1 on: May 22, 2023, 02:26 PM »
I'd be tempted to use JB Weld. Perhaps grind off a little bit of the part that broke off to create a filet to fill with the goop.

RMW
Logged
As of 10/17 I am out of the Dog business and pursuing other distractions. Thanks for a fun ride!

Offline jonnyrocket

  • Posts: 130
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #2 on: May 22, 2023, 02:37 PM »
The price shown on ekat is less than $20.
I personally would just call Festool and get a replacement. Part #435620
Logged

Online Cheese

  • Posts: 10746
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #3 on: May 22, 2023, 03:42 PM »
I’d just replace it for $20.

But if I was in a jam, I’d make a steel peg that would fit in the recess of each half and then JB weld all 3 pieces together.
Logged

Offline tsmi243

  • Posts: 416
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #4 on: May 22, 2023, 06:30 PM »
I can recommend M&M.  Used them lots of times, never a problem.

They occasionally have a bug in the website that shows $99 shipping on certain small parts- but if you email to let them know, they fix it pretty fast.
Logged

Offline 4nthony

  • Posts: 598
    • Slack for Recon Tools
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #5 on: May 22, 2023, 06:37 PM »
Quote from: tsmi243 on May 22, 2023, 06:30 PM
I can recommend M&M.  Used them lots of times, never a problem.

They occasionally have a bug in the website that shows $99 shipping on certain small parts- but if you email to let them know, they fix it pretty fast.

Funny. I noticed that shipping amount and clicked over to Tool Parts Pro where I placed the order.

I've got an unopened container of JB Weld so maybe I'll also try and fix the broken one.

Thanks all.
Logged
Recon Tool Notifications

Anthony

"The best way to get a correct answer on the internet is to post an obviously wrong answer and wait for someone to correct you." - Kevin Kelly

Offline Coen

  • Posts: 2195
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #6 on: May 22, 2023, 07:18 PM »
Or loctite a rod in it.
Logged

Offline ElectricFeet

  • Posts: 178
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #7 on: May 24, 2023, 02:48 PM »
Quote from: 4nthony on May 22, 2023, 06:37 PM
I've got an unopened container of JB Weld so maybe I'll also try and fix the broken one.
Build up the JB Weld around the outside of the cylinder too, to give it more structural strength
Logged

Offline Coen

  • Posts: 2195
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #8 on: May 24, 2023, 04:51 PM »
Before you open an unopened container; do you even use this stop? I can't remember I ever used more than 1 and it's usually the deepest one.
Logged

Offline 4nthony

  • Posts: 598
    • Slack for Recon Tools
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #9 on: May 24, 2023, 05:10 PM »
Quote from: Coen on May 24, 2023, 04:51 PM
Before you open an unopened container; do you even use this stop? I can't remember I ever used more than 1 and it's usually the deepest one.

Valid point. I don't know. I think I mostly used the middle or deepest stop. I never paid much attention to which stop was selected, just that it allowed me to get the depth I needed.

Logged
Recon Tool Notifications

Anthony

"The best way to get a correct answer on the internet is to post an obviously wrong answer and wait for someone to correct you." - Kevin Kelly

Online Cheese

  • Posts: 10746
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #10 on: May 24, 2023, 05:24 PM »
I’ll use 2 of them a lot of the time and sometimes all 3 of them for routing deep dados in wood or for slotting aluminum.
Logged

Offline Frank-Jan

  • Posts: 1330
  • Dutch Canadian living in Belgium
Re: OF 1400 - Broken Stop: Fix or Replace?
« Reply #11 on: May 25, 2023, 08:36 AM »
I use the highest one for setting depth for hinges, and all 3 when routing deeper mortices in steps.
Logged
Pages: [1]   Go Up
« previous next »