Author Topic: Festool clamp dimensions  (Read 456 times)

0 Members and 1 Guest are viewing this topic.

Offline elekes.adam

  • Posts: 4
Festool clamp dimensions
« on: January 13, 2020, 05:05 PM »
Hello all

Can someone measure the dimensions of a festool clamp with a digital caliper for me?
(If it has been done, please guide me to that topic)

I don't have any of these clamps and wanted to know the dimensions before ordering. I'd like to use them in my workbench, that has Bosch Rexroth aluminium profiles all around.

I made a small drawing of the dimensions I would like to get. (A to E)
The other is a sketch of the profile I have in my workbench.
Knowing the dimensions I can overlay one on the other to see if they would fit.

Thank you

Regards
Adam from Hungary

309524-0
309522-1

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline GoingMyWay

  • Posts: 928
Re: Festool clamp dimensions
« Reply #1 on: January 13, 2020, 06:49 PM »
I took some pictures of my measurements.  Hopefully they are what you were looking for.
Inquiring Minds Want to Know

TS55, CT26, RO150, CXS, ETS 150/3, ETS EC 150/5, MFT/3, TS75, DF500, DTS400, OF1400, CT SYS

Offline elekes.adam

  • Posts: 4
Re: Festool clamp dimensions
« Reply #2 on: January 14, 2020, 01:14 AM »
Thanks!

Offline Spandex

  • Posts: 34
Re: Festool clamp dimensions
« Reply #3 on: January 16, 2020, 09:44 AM »
I just checked a Festool clamp in some BR 3030 profile (8mm slot) and it doesn't fit. I'm guessing from the cross section diagram you posted that's the size used on your workbench.