Author Topic: CT MIDI I cord wrap  (Read 820 times)

0 Members and 1 Guest are viewing this topic.

Offline LsDelancy

  • Posts: 28
CT MIDI I cord wrap
« on: June 10, 2022, 09:56 AM »
After seeing a post with a pic of a new CT MIDI I went and looked at the one I bought last week and verified that it has no cord wrap.
It also did not come with any kind of manual.
Was it suppose to include the cord wrap and a manual?
Do I need to go dig up the box and search it?
Not so much worried about a manual, but the cord wrap would certainly be helpful.
« Last Edit: June 10, 2022, 10:12 AM by LsDelancy »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline sawdustinmyshoes

  • Posts: 112
Re: CT MIDI I cord wrap
« Reply #1 on: June 10, 2022, 10:17 AM »
I bought mine in March and it came with a cord wrap and manual.

Offline LsDelancy

  • Posts: 28
Re: CT MIDI I cord wrap
« Reply #2 on: June 10, 2022, 10:32 AM »
I bought mine in March and it came with a cord wrap and manual.

@sawdustinmyshoes

Was the cord wrap attached?
Or was it packed away in some remote pocket in the box and you had to attach it?

Offline FestitaMakool

  • Posts: 1336
Re: CT MIDI I cord wrap
« Reply #3 on: June 10, 2022, 10:37 AM »
Festool pack any separate items in the vac’s bin - if it’s not there it’s probably missing all together.
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline LsDelancy

  • Posts: 28
Re: CT MIDI I cord wrap
« Reply #4 on: June 10, 2022, 10:46 AM »
Festool pack any separate items in the vac’s bin - if it’s not there it’s probably missing all together.

@FestitaMakool

Now that you mention it, I don't think I even opened that up. I was too excited to get it set up and get going with the Domino.

 [doh]

Offline batmanimal

  • Posts: 111
Re: CT MIDI I cord wrap
« Reply #5 on: June 10, 2022, 10:58 AM »
Hah! I just replied in the big Festool tools thread. But yes, it definitely comes with a handle. It should be in the vacuum bin. You will need a long thin screwdriver to install it. I believe it was a T20? Almost sure it was not a PH.

Offline LsDelancy

  • Posts: 28
Re: CT MIDI I cord wrap
« Reply #6 on: June 10, 2022, 11:05 AM »
That's what I get for being in a hurry, like a kid on Christmas with a new toy.  [embarassed]

I've probably been using it without the bag even in place.  [eek]

I'm sure it's not too big of a mess, it was only used on the DF500 for less than 100 mortises.  [tongue]

I feel like a goober now! LMAO

Offline FestitaMakool

  • Posts: 1336
Re: CT MIDI I cord wrap
« Reply #7 on: June 10, 2022, 11:47 AM »
Haha..  [big grin]
- So, you definitely haven't read the manual.. Cause it's in the bin.. but, don't worry the bag will only be dirty on the outside [tongue], and the other parts are in plastic bags. AND you get to try the manual filter clean from day one. - Just kidding, if its just wood shavings and dust, it should be ok to clean out.
“The Stig” Yes, it is true, at least some part of it..
“If you have an old Land Rover and a fit wife, you’re most likely always busy”

Offline dupe

  • Posts: 158
Re: CT MIDI I cord wrap
« Reply #8 on: June 10, 2022, 12:16 PM »
Have a printer? Took about 8 hrs and cost $3.16 in PETG. I have an older Midi

Festool Cable Holder
MFT.1080    CT.Midi    DF.500    DTS.400    ETS.EC150/3    RO.150    RO.90    CXS 10.8    RAS.115

Offline sawdustinmyshoes

  • Posts: 112
Re: CT MIDI I cord wrap
« Reply #9 on: June 10, 2022, 01:50 PM »
I bought mine in March and it came with a cord wrap and manual.

@sawdustinmyshoes

Was the cord wrap attached?
Or was it packed away in some remote pocket in the box and you had to attach it?

As stated by others, it came inside the unit.

Offline Steve1

  • Posts: 203
Re: CT MIDI I cord wrap
« Reply #10 on: June 12, 2022, 08:30 AM »
I was missing the manual on a Festool once.
Contacted the seller (Lee Valley) and the said they would bring one in with their next Festool order.
Never heard from them again.

Eventually contacted Festool, and they sent out right away.

Offline LsDelancy

  • Posts: 28
Re: CT MIDI I cord wrap
« Reply #11 on: June 12, 2022, 08:12 PM »
I opened it up and sure enough, there was everything and a few cupfuls of wood chips.
 [tongue]