Author Topic: Sander to partner RO125  (Read 1157 times)

0 Members and 1 Guest are viewing this topic.

Offline Mavrik

  • Posts: 240
Sander to partner RO125
« on: October 03, 2015, 01:18 AM »
I've built up my Festool collection over more than 10 years.

I've only got, have only ever had and have only ever used one sander - the RO125.

Wait - I've also got the belt sander; but that's a very different tool.

I love my sander and have used it in a squillion different ways.
Can rough remove large volumes with 50 grit and can see my face in the finish following 320 or 400 grit.

I am a hobbyist who makes electric guitars and marimbas and boxes and drums and cheese boards and skate boards and  ...

I often finish with danish oil and carnuba wax; or just wax.
I like a glassy smooth finish.

I don't make anything that doesn't fit on my MFT table.
No doors, tables, cabinets etc

Don't give reasons.
From your gut what is the companion sander I'm missing?
TS55, MFT 1080, PS300, EHL 65, Domino, OF 1010, CTL 22, RO 125, BS75

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Kev

  • Posts: 7652
Re: Sander to partner RO125
« Reply #1 on: October 03, 2015, 01:37 AM »
DTS400

Offline Holmz

  • Posts: 4010
Re: Sander to partner RO125
« Reply #2 on: October 03, 2015, 01:47 AM »
LS130

Offline Cheese

  • Posts: 7879
Re: Sander to partner RO125
« Reply #3 on: October 03, 2015, 01:59 AM »
DTS 400...you need to get into those corners sooner or later.

Offline Alex

  • Posts: 6864
Re: Sander to partner RO125
« Reply #4 on: October 03, 2015, 02:19 AM »
I agree the DTS 400 would best compliment your RO 125. It does corners, but it is not just for corners, but great with smaller surfaces too.