Author Topic: CMS TS55/75 Riving Knife  (Read 526 times)

0 Members and 1 Guest are viewing this topic.

Offline Jmacpherson

  • Posts: 215
CMS TS55/75 Riving Knife
« on: April 24, 2019, 05:35 AM »
Hi

When you insert the TS55/75 into the CMS Unit/Plate it comes with an additional riving knife that ends up being raised a lot higher than the blade and then the blade guard/dust buard attaches to that.

Question, can you use the track saws in the CMS with just the standard riving knife on the saw with complete safety or does the CMS system actually prevent this?

You are asking why, visualize a Sawstop saw which includes the blade guard stile riving knife (much higher than blade) and additional riving knife that is exactly in line with the top of the saw teeth.
If you were to use a MJ Gripper the extra CMS riving knife will get in the way of certain cuts.

The CS 50/70 Precisio saws have two different height settings which actually support what I'm talking about

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline jarbroen

  • Posts: 133
Re: CMS TS55/75 Riving Knife
« Reply #1 on: April 24, 2019, 04:32 PM »
I would say negative on the standard riving knife being completely safe.  You lose the blade guard which is a big part of the safety.
I've fiddled with the TS75 version of the CMS insert and I wouuldn't feel comfortable using it without the guard. 
However, I am a big chicken when it comes to tablesaws so other opinions will differ. :)

Offline Svar

  • Posts: 1800
Re: CMS TS55/75 Riving Knife
« Reply #2 on: April 24, 2019, 05:24 PM »
There is nothing that prevents you from using TS55/75 in CMS with its standard knife. However, do it at your own risk.
« Last Edit: April 24, 2019, 05:49 PM by Svar »

Offline Jmacpherson

  • Posts: 215
Re: CMS TS55/75 Riving Knife
« Reply #3 on: April 26, 2019, 08:54 AM »
Thanks guys, wasn't keen on the idea of just the TS55 riving knife either.
The Grr-ripper becomes the guard.