Author Topic: CMS  (Read 2909 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul Franklin

  • Posts: 157
CMS
« on: January 31, 2007, 01:17 AM »
Hi Chrisian

I understand that the Preccisio won't be coming this direction, but I thought I heard that the CMS system might, any news?

Thanks

Paul

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Christian Oltzscher

  • Festool Employee.
  • Posts: 157
Re: CMS
« Reply #1 on: January 31, 2007, 11:34 AM »
Hi Paul,

There is still a chance of the CS50 and CS70 (Precisio) coming to the US. There is no chance that
the CMS will get UL approval. The only exception might be the router table insert.

Regards,

Christian

Offline Paul Franklin

  • Posts: 157
Re: CMS
« Reply #2 on: January 31, 2007, 12:05 PM »
Christian

That is hopeful, the CS50 is a great saw! I don't suppose you have a rough time frame, I know thats a tough one. On any of them.

Thanks again

Paul

Offline Christian Oltzscher

  • Festool Employee.
  • Posts: 157
Re: CMS
« Reply #3 on: January 31, 2007, 01:14 PM »
Paul,

Sorry, no ETA yet. We have learned our lesson to talk about a new tool once it has received UL approval
and we know when it will come to the US. The approval process for the CS saws has been going on for
several years now.

Regards,

Christian