« previous next »
Pages: [1]   Go Down

Author Topic: CT Midi Cleantec - several years old - what can go on top?  (Read 605 times)

0 Members and 1 Guest are viewing this topic.

Offline RonMiller

  • Posts: 344
CT Midi Cleantec - several years old - what can go on top?
« on: October 15, 2022, 02:29 PM »
Is there any way to mount a WorkCenter or ToolHolder WHR-CT to an older Midi?

On my CT 33 I custom made a wooden base and built my own. But would rather buy and install
Logged
Ron
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Coen

  • Posts: 2191
Re: CT Midi Cleantec - several years old - what can go on top?
« Reply #1 on: October 15, 2022, 06:02 PM »
Which version of the WHR-CT?

The older one only mounts as a classic Systainer. I can't think why it wouldn't just fit on a Midi?

EDIT: oh, not the Planex holder but the steel-rod sander-holder.  [embarassed]
Logged

Offline RonMiller

  • Posts: 344
Re: CT Midi Cleantec - several years old - what can go on top?
« Reply #2 on: October 15, 2022, 06:39 PM »
Since I don't have a Workcenter, I guess it would have to be a new version one, so it doesn't work. Of course per your idea, if I could find an old one on ebay, etc. that would be good. Thanks for the tip.
Logged
Ron

Offline Coen

  • Posts: 2191
Re: CT Midi Cleantec - several years old - what can go on top?
« Reply #3 on: October 15, 2022, 08:59 PM »
What product number do you mean? The steel pole to mount a sander on? The black base to park the Planex on? If the latter; which of two versions?
Logged

Offline squall_line

  • Posts: 1971
Re: CT Midi Cleantec - several years old - what can go on top?
« Reply #4 on: October 15, 2022, 10:04 PM »
The Workcenter WCR-1000 requires a CT-26 or larger to fit in stock configuration.  To mount to an older (or newer) MINI or MIDI, you would need to fabricate some sort of adapter plate, which I think has been described on here in a thread somewhere.

Source: I have an OG MINI, a MIDI-I, a CT-26, and a Workcenter WCR-1000 and tried to fit it on all three, only succeeding in fitting to the 26.
Logged
Pages: [1]   Go Up
« previous next »