« previous next »
Pages: [1]   Go Down

Author Topic: Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)  (Read 13865 times)

0 Members and 1 Guest are viewing this topic.

Offline PaulMarcel

  • Posts: 1543
    • Voilà, my blog
Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)
« on: February 08, 2011, 03:17 AM »
Can't do the RO-125 without the bigger cousin, the RO-150.  This review is a playlist (like I shouldda done the other one... mea culpa).  First video of the playlist is the review.  Second video of the playlist is the demo.  This is the same demo as what I did with the RO-125 (same Purpleheart) but I gave the RO-150 the side with a nasty pit.  I also went from P50 through P320 (I don't have all those grits for the RO-125 so I couldn't do those there... use your imagination, add a bikini where necessary).

http://www.youtube.com/my_playlists?p=5A0772E99C06AE20
« Last Edit: February 08, 2011, 05:11 AM by PaulMarcel »
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline mosez

  • Posts: 102
Re: Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)
« Reply #1 on: February 08, 2011, 06:00 AM »
another great review!
what the removable dust port also is good for: getting into tight spots when cleaning with the vac...
Logged
PS 300 EQ (Circle Cutter, Guide Stop), CTL Midi (Cleaning Kit), TS55 EBQ (1400mm, 800mm Guide Rails, SYS-FS 2, 2 FS-HZ 160, 2 FS-SZ 120 2 FS-SZ 300, Panther Blade, Universal Blade), RO 90 DX FEQ (selfmade SYS-STF 90), RO 150 FEQ (SYS-STF 150), paddle-style DF 500 Q Set (Domino Assortment Sys), OF 1400 EBQ (Circle Cutter, Guide Stop, Edge Guide), MFT/3 (Clamping Elements), CMS-GE, CMS-OF, CMS-TS55, CMS-PS300, CMS-LA, CMS-ST, CMS-VB, Fein MultiMaster 250Q (T-LOC Systainer, Plug-It-Pigtail), Bosch GBH-26 DFR, GWS 15-125 CIH, GHG 660 LCD, Dremel

Offline Frank Pellow

  • Posts: 2748
  • Toronto, Ontario and Lake Pivabiska, Ontario
Re: Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)
« Reply #2 on: February 12, 2011, 12:40 PM »
Paul, I am really enjoying and lerarning from your reviews.   [thanks]

Having seen this one, I plan to purchase a hard pad and an alternate handle for my Rotex 150.  But, I can't find the alternate handle in the Festool catalogue.  What is it's part number?
Logged
Cheers,   
               Frank (Festool connoisseur)

Offline Peter Halle

  • Global Moderator
  • *
  • Posts: 12370
  • Remington Steele - My Third Boy
Re: Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)
« Reply #3 on: February 12, 2011, 02:11 PM »
Frank,

If you are talking about the front aux handle, it is not on the Festool USA website nor in the catalog.  I checked Uncle Bob's website and its part number was "Auxiliary Handle".  I am sure your favorite dealer can get it for you.

If you are talking about another side handle, that part number is ZG-RAS/RO.  No cost in the US ekat.

Peter
Logged

Offline PaulMarcel

  • Posts: 1543
    • Voilà, my blog
Re: Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)
« Reply #4 on: February 12, 2011, 02:31 PM »
Oh, I didn't think of putting a video call-out with the numbers on them.  Maybe next time...

The product number of the auxiliary handle is 495188 ($16).  Hard pad is 496149 ($38).

I looked at your pictures of your RO-150s.  Definitely got your use out of them!!  The older 150 has a body that looks just like the current RAS 115.  It would be interesting to know if the auxiliary handle can fit on the older 150.

Thanks, too, for the compliments!
Logged
Visit my blog for Festool adventures
IG: @PaulMarcel328 - basically stories, mix of circus, woodworking, maybe gym stuffs... it's not an extension of my blog, /tedtalk

Offline Frank Pellow

  • Posts: 2748
  • Toronto, Ontario and Lake Pivabiska, Ontario
Re: Video Review of Festool RO-150 Rotex Dual-Action Sander (571760)
« Reply #5 on: February 12, 2011, 02:59 PM »
Yes Paul, it's the auxilary front handle I am interested in and thanks for the part number. 

At the time I took the picture (last Monday), the newer Rotex 150 had not been used yet.  Now, I have logged a couple of hours on it.
Logged
Cheers,   
               Frank (Festool connoisseur)
Pages: [1]   Go Up
« previous next »