Author Topic: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys  (Read 8006 times)

0 Members and 1 Guest are viewing this topic.

Offline GreenGA

  • Posts: 878
  • JR
New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« on: August 27, 2011, 09:43 AM »
Not certain if this was previously posted.  If so, let me know and I'll remove it.

Centrotec Review


Here is one for the MFS...


And another for the Domino


And the Guide Rail System
http://www.youtube.com/user/FestoolInternational#p/c/511DA7A1B29B9B47/4/jsgJbdKTerk

And one more for the VS600 using the 1010
http://www.youtube.com/user/FestoolInternational#p/c/511DA7A1B29B9B47/5/4WqtCEq2lOc

And for the NAINA show, the VAC-SYS
« Last Edit: August 27, 2011, 10:29 AM by GreenGA »
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline woodguy7

  • Posts: 2727
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #1 on: August 27, 2011, 03:11 PM »
I don't remember seeing these before but that's not to say.  I will no doubt sit & watch all of them now  [big grin]

Keep meaning to ask, who's the chick in the avatar pic ?
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too

Offline pugilato

  • Posts: 579
  • Pugilato is not really my name... Andy
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #2 on: August 27, 2011, 03:15 PM »
Very cool... thanks

Offline GreenGA

  • Posts: 878
  • JR
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #3 on: August 27, 2011, 03:17 PM »
As best I can tell, those videos were posted just yesterday.

Ah, the chick is a photo of JoAnn, aka JR, when she was a bit, well, actually a little more than a bit..., younger.  It's one of my favorite photos of her.  [drooling]
« Last Edit: August 27, 2011, 03:19 PM by GreenGA »
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline Ken Nagrod

  • Restricted
  • Posts: 3438
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #4 on: August 27, 2011, 03:50 PM »
JR does all of Gary's tool modeling.  [cool]

Offline woodguy7

  • Posts: 2727
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #5 on: August 27, 2011, 03:50 PM »
 [thumbs up]
If its made of wood, i can make it smaller.
Shirt size medium
p.s- ive started reading these too

Offline GreenGA

  • Posts: 878
  • JR
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #6 on: August 27, 2011, 04:18 PM »
Funny you should mention...

I hope she doesn't see this thread for a bit  I finally convinced her to model the Festool Apron so I can get a photo to blow up and hang in the shop. [not worthy]

I had to promise nothing would be exposed and it would be very tasteful.

JR does all of Gary's tool modeling.  [cool]
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline Ken Nagrod

  • Restricted
  • Posts: 3438
RE: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #7 on: August 27, 2011, 04:22 PM »
Oh I see a calender coming!  [big grin]

Offline GreenGA

  • Posts: 878
  • JR
Re: New VIdeos
« Reply #8 on: August 27, 2011, 04:28 PM »
Don't think it hadn't crossed my mind.  Matthew would have a fit! [embarassed]

Oh I see a calender coming!  [big grin]
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.

Offline RDMuller

  • Posts: 314
Re: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #9 on: August 28, 2011, 10:13 PM »
Great Find.  Looking at the number of views, these have not been out there long. 

Offline GreenGA

  • Posts: 878
  • JR
Re: New Videos - Centrotec Set, MFS, VS 600, FS Rail, Vac-Sys
« Reply #10 on: August 29, 2011, 08:02 AM »
They were good finds...

I keep an eye out for all videos Festool and created a directory under my "My Documents" folder called.... "My Festool Videos", sub divided by tool or tool type.  I think I have more than 100 now.
Never use a 2x4, when a 2x6 will do just as well.

SYS-Lites, CMS/GE, TS55, KAPEX, MFT/3, CXS Kit, C15 Set, C12 Set, T18 Set, Ti15 Set, CT48 w/Boom Arm, Carvex PSBC, HL850, HL65L, RO90, RTS400, DTS400, LS130, DX93, RO150, ETS 150/3, RAS 115/4E, RS2E, Domino 500 & 700 Sets, MFK700 Set, OF1010 EQ, OF1400, OF2000E+, MFS700, FS3000/2, LR 32-SYS+97" rail, 2011 Centrotec Set, Metric and Imperial Zobo Forstner Bit Set, VS600 Dovetail System, Guide Rail Kit, Parallel Guides, Tradesman Cleaning Set, Shinex, lotsa 'tainers (Sys, Sorts, Minis, Midis, Maxis. Attics, Classic, New and Blue).
Coming Attractions: Workcenter, NAINA when available.