Author Topic: My new old stock Festool 1010 plunge router  (Read 6168 times)

0 Members and 1 Guest are viewing this topic.

Offline squall_line

  • Posts: 775
Re: My new old stock Festool 1010 plunge router
« Reply #30 on: September 06, 2021, 08:40 AM »
This is better than the owners manual:

There are supplemental manuals for most of Festool's products and tools.  They're linked on their website.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #31 on: September 06, 2021, 12:46 PM »
Dust collection works so well router can hold a board mid air with vacuum on

Offline waho6o9

  • Posts: 1609
    • Garage Door Handyman.com
Re: My new old stock Festool 1010 plunge router
« Reply #32 on: September 06, 2021, 01:08 PM »
That's awesome.  There's another piece to that collector as well.  At least for my 1400 there is, not sure about the 1010 though. 


335491-0

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #33 on: September 06, 2021, 03:41 PM »
That's awesome.  There's another piece to that collector as well.  At least for my 1400 there is, not sure about the 1010 though. 


(Attachment Link)
. Mine has the plastic insert snapped in. My dust port is metal and built in

Offline Crazyraceguy

  • Posts: 678
Re: My new old stock Festool 1010 plunge router
« Reply #34 on: September 06, 2021, 04:21 PM »
That's awesome.  There's another piece to that collector as well.  At least for my 1400 there is, not sure about the 1010 though. 


(Attachment Link)
That is one of the differences of the OF1400. That part is essentially "built-in" to the OF1010.
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700 (2)
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75
Shaper Origin/Workstation

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #35 on: September 06, 2021, 11:16 PM »
Since I was working on the NOS Bosch 1611 and 1615 applying liquid graphite lube to the plunge posts I decided to just put a tiny bit of graphite lube on the Festool 1010. posts. Made it even smoother plunging.

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #36 on: September 10, 2021, 01:32 PM »
Really enjoying the router. Actually looking for things to use it on. I don’t believe there are festfools.  As long as you use something and can afford it buy it. I’m 53. I’ll have that router til I die hopefully in my 90s. Do my philosophy is buy great once cry once. Buy cheap you’ll be crying all the time. And that router is sized to be used a lot.

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #37 on: September 12, 2021, 08:04 PM »
I ordered these 8mm shank set from Amazon uk. It’s Bosch but black clorored as opposed to blue.  I paid $134. Since my order up to $154. 6 bits were $50. 15 were $99. And the 30 I got was $134.  I really wanted a high quality starter set with maybe 6 bits for same money. Figured I might as well go for the 30 since it’s not like I can gradually build my 8mm shank collection . So now my little Bosch trimmer has a Freud boxed 1/4 set . And the Festool has a 8mm set.  And the Bosch 1611,1615evs, 1617, 1618evs and Milwaukee 5625-20 get the extensive collection of Freud, Cmt, white side and Mlcs. Hope the set is a least decent Bosch Professional 2607017475 30-Piece Set Wood Router Bit Set for 8mm Shank Router https://www.amazon.com/dp/B07ML7K2G8/ref=cm_sw_r_cp_api_glt_fabc_GAMER5ZJX7VSRJ947WB6?_encoding=UTF8&psc=1

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #38 on: September 13, 2021, 08:02 PM »
[ Specified attachment is not available ]

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #39 on: September 13, 2021, 08:06 PM »
Pics are of port adapter made on a 3D printer from a guy on eBay. My WAP vacuum rubber port adapter fits perfect . Beats prying the rubber adapter on the oblong Festool dust port.

Offline waho6o9

  • Posts: 1609
    • Garage Door Handyman.com
Re: My new old stock Festool 1010 plunge router
« Reply #40 on: September 13, 2021, 09:58 PM »
Nice vacuum adapter. 

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #41 on: September 15, 2021, 09:11 PM »
Got my Bosch 8mm shank router bit set today. They are black finish made in China. 8mm definitely is beefier than 1/4. I compared a 8mm Bosch to a 1/4 Freud . Both flush trim bits.

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #42 on: September 15, 2021, 11:06 PM »
Tested a Bosch 20mm.  Slight burn marks at beginning and end of cut. Slight burn on right hand side where router got off track a little. Used the Festool fence

Offline Toolabundant

  • Posts: 35
Re: My new old stock Festool 1010 plunge router
« Reply #43 on: September 15, 2021, 11:10 PM »
The fence