Author Topic: CXS video with Kreg pocket jig.  (Read 4438 times)

0 Members and 1 Guest are viewing this topic.

Offline erock

  • Posts: 1254
CXS video with Kreg pocket jig.
« on: February 09, 2013, 01:15 PM »
Hello guys.   I know their are  a few videos on the FOG for the CXS drill.  But I just wanted to share this short video I did.

I'm making boxes for my dogs food bowls so they are raised up off the ground.  I'm not making anything fancy.  Just simple boxes and using

the Kreg pocket hole jig to fasten the boxes together.  While I was building them I thought I would share how sweet the CXS is for the guys

who may on the fence about this drill.  Hopefully this may push some guys to the side of buying one  [embarassed].   










Eric

P.S.   I'm trying to insert the video and not a link.....hope it works.




<< Fixed video to embed it - Shane >>
« Last Edit: February 09, 2013, 02:10 PM by Shane Holland »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline erock

  • Posts: 1254
Re: CXS video with Kreg pocket jig.
« Reply #1 on: February 09, 2013, 01:24 PM »
Nope....didn't work.

Sorry guys.   But I'm not sure how to put the actual video inside the post.   I wanted to input the video instead of a link so it wouldn't take you to

another page.    Any help?


Eric

Offline Brice Burrell

  • Posts: 7388
Re: CXS video with Kreg pocket jig.
« Reply #2 on: February 09, 2013, 01:33 PM »
Eric, use the link function (the globe icon/insert hyperlink), paste the url in the pop up box, click ok, the next prompt asks for the url name, don't enter anything just click ok.
« Last Edit: February 09, 2013, 02:25 PM by Brice Burrell »

Offline erock

  • Posts: 1254
Re: CXS video with Kreg pocket jig.
« Reply #3 on: February 09, 2013, 01:36 PM »
Thanks Brice.   I used the  insert flash.    [embarassed]    I'll get the hang of it.....someday.   


Eric

Offline Festool USA

  • Festool USA Employee
    FOG Administrator
  • *
  • Posts: 8430
    • Festool USA
Re: CXS video with Kreg pocket jig.
« Reply #4 on: February 09, 2013, 11:51 PM »
Sorry I didn't respond right after I edited Eric's post to embed the video. On the forum, all you need to do is copy and paste the YouTube link that looks like the one below and the forum will automatically embed it in the post. You don't have to click any of the buttons or anything. Just paste the URL in the body of the post.

Code: [Select]
http://www.youtube.com/watch?v=riUOsQ9z_LQ#!