« previous next »
Pages: [1]   Go Down

Author Topic: A short vid featuring the HSK 80x130 vac sanding block  (Read 13277 times)

0 Members and 1 Guest are viewing this topic.

Offline Saskataper

  • Posts: 278
A short vid featuring the HSK 80x130 vac sanding block
« on: March 22, 2014, 10:21 PM »

Logged
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Rob Z

  • Posts: 1007
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #1 on: March 22, 2014, 10:56 PM »
Saskataper

That looks handy. We have the HSK set, but there is no connection for the vac. I just checked Festool USA and don't see the item you're using. Can you post the part number?

Thanks.
Logged

Offline Saskataper

  • Posts: 278
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #2 on: March 22, 2014, 11:13 PM »
« Last Edit: March 22, 2014, 11:16 PM by Saskataper »
Logged

Offline Rob Z

  • Posts: 1007
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #3 on: March 22, 2014, 11:29 PM »
Thanks for the number. I guess I couldn't find it on Festool USA because that part number doesn't show up in the search function. (!)

Logged

Offline tjbnwi

  • Posts: 6378
  • No longer in Cedar Tucky Indiana
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #4 on: March 23, 2014, 05:02 PM »
I recently received the HSK with the AS hose from Tom. I can highly recommend it. The Pocket Stickfix is another must have sander.

Tom
Logged

Offline BMAC

  • Posts: 160
  • BMAC Construction & Consulting Ltd.
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #5 on: January 03, 2015, 07:55 PM »
Does anyone know if this is available in Canada? I can't seem to locate any information on the Canadian Dealer sites about this item. I do Fire and Flood repairs in Calgary, mostly cabinet repairs and tons of millwork damaged by water, but I sometimes follow a messy drywaller trade and I have to sand out lumps of drywall below the baseboard level to get them to sit flat  :-[   I will on the odd occasion will replace the small 3"x6" drywall coupon cuts to the drywall behind and below the baseboard line made by the emergency techs to allow them to dry the wall cavities with air movers when water damage occurs in a structure (mostly high rise buildings) and this tool would be great addition to my toolkit!
« Last Edit: January 03, 2015, 07:59 PM by BMAC »
Logged
Bruce
BMAC Construction & Consulting Ltd.

Support services for the Fire and Flood Restoration Industry. Specializing in custom cabinetry restoration and millwork.

Offline TristanI

  • Posts: 7
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #6 on: January 03, 2015, 08:03 PM »
Yep its available. I bought mine from atlas machinery in Toronto. festoolshop.ca it was $79.
Logged

Offline ear3

  • Posts: 4194
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #7 on: January 03, 2015, 08:04 PM »
Nice use of the syslite as well.  Might just have to get it the next time I'm doing drywall.
Logged
Kapex KS 120 w/UG Cart and Extensions • CXS Set • T 18+3 w/Centrotec Installer's Set • PDC 18/4 • TID 18 • TS 75 • TSC 55 • HKC 55 w/250, 420 and 670 FSK rails • Carvex 420 w/Accessory Kit • Domino 500 Set • Domino 700 XL • OF 2200 w/Base Accessory Kit • OF 1400 • OF 1010 • MFK 700 EQ Set • LR 32 • MFS 400 w/2000, 1000, and 700 extensions • Rotex 90 • Rotex 150 • LS 130 • ETS-EC 150/5 • ETS-EC 150/3 • Pro 5 LTD • RTS 400 • RAS 115.04 • RS 2 • HL 850 • Vecturo OS 400 • AGC 18-115 • CT 26 w/BT module • CT Sys w/Long-Life Bag • CT-VA 20 • MFT/3 • STM 1800

Offline BMAC

  • Posts: 160
  • BMAC Construction & Consulting Ltd.
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #8 on: January 03, 2015, 08:07 PM »
Here's a pic of the kind of crappy drywall work that I seem to encounter with poor drywall trade I was following. I spent probably 3-5 hours per week prepping areas to install baseboards. VERY frustrating!!! Thankfully the GC in this case has now replaced this trade with a better drywall sub [smile]
Logged
Bruce
BMAC Construction & Consulting Ltd.

Support services for the Fire and Flood Restoration Industry. Specializing in custom cabinetry restoration and millwork.

Offline BMAC

  • Posts: 160
  • BMAC Construction & Consulting Ltd.
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #9 on: January 03, 2015, 08:09 PM »
Thanks for the info tristanl !
Logged
Bruce
BMAC Construction & Consulting Ltd.

Support services for the Fire and Flood Restoration Industry. Specializing in custom cabinetry restoration and millwork.

Offline Jaybolishes

  • Posts: 399
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #10 on: January 03, 2015, 09:42 PM »
I love this little sander. I have had  the rts400 with tons of sanding paper for it and the holes match the HSK.  But I noticed there's additional holes in the hsk that the rts400 sanding paper doesn't have. Does the hsk have its own line of paper specifically for it?

I ordered this from an online dealer who had never heard of this sander when I asked to order it, which surprised me.  He was surprised too that this little gem had gone so long unnoticed.
« Last Edit: January 03, 2015, 09:59 PM by Jaybolishes »
Logged

Offline Tom Bellemare

  • Inactive Member
  • *
  • Posts: 5148
  • Festool demo's & personal service in Central Texas
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #11 on: January 04, 2015, 12:32 PM »
There are 4 of these sanders. One uses the 80 x 133 paper that the LS 130 and RTS 400 also use. One uses the 115mm x  228mm paper that the RS 2 uses. The other two use special paper. It's 80mm x 400mm and is perforated at 200mm. That allows it to be used for either the 80mm x 200mm sander or the 80mm x 400mm sander.


Tom
Logged

Offline BMAC

  • Posts: 160
  • BMAC Construction & Consulting Ltd.
Re: A short vid featuring the HSK 80x130 vac sanding block
« Reply #12 on: March 13, 2015, 12:38 PM »
I ordered (bought and paid for) one of these units from KMS Tools here in Calgary.

That was almost 3.5 weeks ago and still no sander received at the local store. I was told that it would take a couple of weeks which I was okay with, but this is stretching out longer than I expected.

Well, maybe I should've ordered it through Atlas, as was suggested by another poster as their site showed that they had it in stock..... ::)

Logged
Bruce
BMAC Construction & Consulting Ltd.

Support services for the Fire and Flood Restoration Industry. Specializing in custom cabinetry restoration and millwork.
Pages: [1]   Go Up
« previous next »