Author Topic: CT Wings - Short Review  (Read 3075 times)

0 Members and 1 Guest are viewing this topic.

Offline Untidy Shop

  • Posts: 2746
CT Wings - Short Review
« on: March 17, 2015, 07:21 AM »

First use of CT Wings was fitting quad around edges of pine lining board ceiling.

Very impressed, as suction on CT22 was around 20% and with Wings on a rough surface; not that the quad was heavy. By holding one end, the Wings enabled me to achieve a more precise fit, and quickened the time taken to pre-drill and nail.

Only draw back was that a normally relatively quiet activity, actually had me wearing ear muffs!
« Last Edit: March 18, 2015, 03:27 AM by Untidy Shop »
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.