Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: T18+3 not engaging  (Read 712 times)

0 Members and 1 Guest are viewing this topic.

Offline jasen

  • Posts: 55
T18+3 not engaging
« on: June 17, 2021, 02:15 AM »
Hi Guys,

I have the above tool and was drilling with Jacobs chuck, drill got stuck and thought that was odd (5mm into pine). Thought it was the chuck but realised soon after that I can hold my fingers on the centrepiece ?) and when I pull the trigger, I hear a rattling sound - no pressure drill spins and usual drill noise.

I Just played around with it again with speed 2 and drill /screw mode and its not a problem. Went back to speed 1 and no problem again.

So it looks like intermittent issue (which I didnt figure out when working with it) Perhaps Gearing?

I havent opened it up yet, anyone have any idea what to look for when I eventually do?
I looked up Ekat and if its the gear housing $110 or motor ($410) I may look at buying a new drill :(
I do hate throwing stuff away and like to fix

Cheers

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Alex

  • Posts: 7665
Re: T18+3 not engaging
« Reply #1 on: June 17, 2021, 02:54 AM »
The rattling is an indication it might be the gearbox.

Sometimes it just happens once, and then the drill goes on without problem. Just a little gear having a fit. But if your problem persists a new gearbox might be the solution because the gears can wear out or break.

Offline jasen

  • Posts: 55
Re: T18+3 not engaging
« Reply #2 on: June 17, 2021, 04:09 AM »
Thanks Alex. Ill keep using and if it happens again I might open her up and have a look or decide to buy a new one