Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: RO90 with delta pad that I cannot remove  (Read 343 times)

0 Members and 1 Guest are viewing this topic.

Offline SAB

  • Posts: 7
RO90 with delta pad that I cannot remove
« on: April 17, 2021, 12:25 AM »
My RO90 that I have owned for a couple of years now and never had the need for the delta pad until recently... And now I cannot get the delta pad released.  I set the mode dial to the arrow position, and I slide the green lever on the delta and rotate the delta clockwise to the unlocked icon. And nothing happens...
The directions are useless for removing the delta pad. Any assistance would be greatly appreciated.

Thank you,
Steven

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline squall_line

  • Posts: 243
Re: RO90 with delta pad that I cannot remove
« Reply #1 on: April 17, 2021, 01:46 AM »
To remove the Delta pad, you push in the green lever on the delta piece and turn counter-clockwise (towards the unlock icon).  The goal is to get the little arrow next to the lock icon to line up with the little arrow on the bottom of the Rotex unit itself.

It was pretty tight when I tried it just now, but it worked when I turned it counter-clockwise.

The pictographs on the bottom of the unit (if they're still there) are slightly more helpful than the icons on the delta pad itself, but not by much.

Online Crazyraceguy

  • Posts: 390
Re: RO90 with delta pad that I cannot remove
« Reply #2 on: April 17, 2021, 06:05 PM »
Yes, counter-clockwise. They call it anti-clockwise in some places. UK maybe?
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1400
MFK700
TS55, FS1080, FS1400 holey, FS1900, FS3000
CT26E + Workshop cleaning set
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
TS75