Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: PS 300 EQ blade not sitting straight  (Read 315 times)

0 Members and 1 Guest are viewing this topic.

Offline stump28

  • Posts: 1
PS 300 EQ blade not sitting straight
« on: July 03, 2022, 11:52 AM »
Hi, I was given a PS 300 jigsaw a while back and when I came to use it for the first time I noticed that after inserting the blade it doesn’t sit straight. It looks as if the when releasing the locking lever it pulls the blade across to far so it’s not sitting straight through the guides by quite a way out. Is there an adjustment I’m missing to straighten it up? It’s not that the foot plate is out as the blade is visibly off down the jigsaw body itself. Releasing the locking lever slowly it hits the blade, gets to a point where it’s sitting straight then pulls it over another few mm. is there something simple I’m missing?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Chris Wong

  • Festool Dealer
  • *
  • Posts: 1000
  • I make things that challenge me.
    • Flair Woodworks
Re: PS 300 EQ blade not sitting straight
« Reply #1 on: July 03, 2022, 02:06 PM »
I think that it's not the blade clamp/lock that needs to be adjusted, rather than the guides. There should be a screw that secures the guides and allows lateral positioning.
Chris Wong, http://FlairWoodworks.com and https://www.ultimatetools.ca/
First Festool was a free pencil.
Shipping live-edge cribbage boards around the world since 2010.

Offline Frank-Jan

  • Posts: 1275
  • Dutch Canadian living in Belgium
Re: PS 300 EQ blade not sitting straight
« Reply #2 on: July 04, 2022, 08:57 AM »
I no longer have my trion, but I never got mine to cut  square using the guides, even after setting it up meticulously as in the instructions mentioned here at the time.  (I think it was, pull the blade forward, close the guides, then loosen the guides untill the blade pops back)

So I used with my saw with the guides loose, for years and it worked ok.
 I was planning on figuring out how to get it to work properly, my guess was, that the part of the guides that remains in place wasn't alligned properly, but my van got broken into, and a lot of tools got stolen including the trion; so I never got around to it)

From the looks of it your saw is worse than mine was.
« Last Edit: July 04, 2022, 05:16 PM by Frank-Jan »