Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Bpc 15v won’t charge properly  (Read 1718 times)

0 Members and 1 Guest are viewing this topic.

Offline Chris161190

  • Posts: 36
Bpc 15v won’t charge properly
« on: March 14, 2019, 04:51 PM »
Hi all,

Quick question, I have a 15v bpc battery pack which when plugged in to charge shows full after about 30 seconds. It isn’t full as when plugged into the tool,the indicator light only shows 1 out of 3 bars...

Any suggestions what to try or is it likely a dead duck? I do have two of these battery packs and swapped the chips from one battery to the other to check, but has done nothing. Volt meter across the terminals prove anything?



Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Untidy Shop

  • Posts: 2746
Re: Bpc 15v won’t charge properly
« Reply #1 on: March 14, 2019, 05:02 PM »
Try wriggling the battery when first inserted in charger. On mine the terminals do not always align even though the battery looks to be fully inserted.
If you don't like Signatures, just go to Look and Layout and tick No Signatures.

“The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed.”
― Robert M. Pirsig, Zen and the Art of Motorcycle Maintenance: An Inquiry Into Values