Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: DF 700 Systainer problem  (Read 1895 times)

0 Members and 1 Guest are viewing this topic.

Offline morogue

  • Posts: 49
DF 700 Systainer problem
« on: June 24, 2014, 08:13 PM »
I got the xl a little while back, before the discount  >:( and just today got the systainer full of 8 and 10mm dominos (and the cutters).
I went to put the 8 and 10mm cutters in the df 700's systainer, in their respective slots, and they don't fit. They both want to fall right out as soon as the lid is closed.
I noticed that the 12mm that comes with the xl has a nice cap, and that is what holds it snugly in its slot.
What am I missing or doing wrong?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Crox G

  • Posts: 93
Re: DF 700 Systainer problem
« Reply #1 on: June 24, 2014, 09:00 PM »
Is the cutting end down and the threaded butt up?
CT Midi, ETS 150/3, OF 1400, TS 55, CXS, RO 90, MF-TB, Syslite, necktie, T18 + 3, Carvex PSC 420 EB, Ti15, Domino XL 700, Vecturo

Offline morogue

  • Posts: 49
Re: DF 700 Systainer problem
« Reply #2 on: June 24, 2014, 09:51 PM »
I'm guessing that is the orientation that works?
I was going cutter up, because that is how the 12mm was oriented when bought, and was a bit of a bugger to get loose to start.
I guess I'll try cutter down now and see how it goes.

Offline bkharman

  • Posts: 2074
Re: DF 700 Systainer problem
« Reply #3 on: June 24, 2014, 09:58 PM »
I never use those slots. I just leave the cutters in the spiral cases and put them in the bottom of the 700 case. I also have my domi-shims, adapters and other 700 accessories in there. Really a lot of room in that sys.
People, I just want to say, you know, can we all get along? Can we get along?

Offline morogue

  • Posts: 49
Re: DF 700 Systainer problem
« Reply #4 on: June 24, 2014, 10:02 PM »
Yep. All I had to do is just look at the damned diagram of the cutters facing down, right where you insert the cutters.
File that under "DUH, DOY".
Next question, does that foam hold up?