Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Kapex blade guard stuck sometimes  (Read 320 times)

0 Members and 1 Guest are viewing this topic.

Offline krm197

  • Posts: 1
Kapex blade guard stuck sometimes
« on: May 28, 2020, 10:50 PM »
My recently purchased Kapex (less than a week of use) starting exhibiting problems lowering the saw head.  I identified the problem as a pin near the top blade guard which gets stuck on a piece of the guard itself.

Image of the offending pin attached to this post.

I've stuck a piece of tape there for now to prevent the pin from returning to its default position all the way, which temporarily fixes the problem for now.

Does anyone else have any advice or experience with this?

Thank you!
315476-0

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Claimdude

  • Posts: 398
Re: Kapex blade guard stuck sometimes
« Reply #1 on: May 29, 2020, 07:42 AM »
Mine does the same thing. I had not spent enough time to diagnose the offending part but did find that if I start the blade before lowering it lowers without a hitch. Thanks for posting and I am looking forward to seeing if anyone has a permanent fix.

Jack

Offline Birdhunter

  • Posts: 3047
  • Woodworker, Sportsman, Retired
Re: Kapex blade guard stuck sometimes
« Reply #2 on: May 29, 2020, 11:13 AM »
Looked at my Kapex. On the right side of the blade, there is a silver metal bar that acts to retract the blade guard IF both the trigger and the interlock buttons are depressed at the same time. This also allows the motor to start. If the two buttons are not both depressed, the silver metal bar doesn’t allow the blade guard to retract.

The pin appears to be part of the safety interlock system.

If the pin does not retract when both buttons are depressed, there is probably something broken in the interlock safety system or there may be debris clogging the mechanism.

I am not a Kapex e pert, just saying what I see on my Kapex.
Birdhunter