Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Is my Kapex at End of Life?  (Read 365 times)

0 Members and 1 Guest are viewing this topic.

Offline katemelkert

  • Posts: 2
Is my Kapex at End of Life?
« on: April 23, 2021, 01:23 PM »
Hi all,

First time poster here. I have a KS 120EB, manufactured in 02/09, at work and during the last project build it died. It would start it up then wind down to nothing in a few seconds. I live across the country from the only repair shop in Canada and since it's well out of warrantee and shipping would be very expensive, I thought I'd order parts and fix it myself. I replaced the motor (it was still the original!) and the brushes and put it back together. I just fired it up yesterday and it did the exact same thing. Started up and then died right away. Has anyone experienced this? I have a hunch that it's just at the end of life. If not, it's not worth spending the money to ship it out if there is a part I can replace. I can't find the contact information of the lead service tech in Toronto. I was hoping to send him a video for diagnosis. Does anyone have it? Does anyone have any ideas what the problem could be?

Kate



Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline serge0n

  • Posts: 150
Re: Is my Kapex at End of Life?
« Reply #1 on: April 23, 2021, 01:57 PM »
Hi Kate, welcome to FOG.

Have you replaced both the motor and the controller? If this is a typical "Kapex smoke" issue I think both needs to be replaced. There was another post here with attached YT videos that explains how to do that.

Offline katemelkert

  • Posts: 2
Re: Is my Kapex at End of Life?
« Reply #2 on: April 23, 2021, 02:25 PM »
Thanks for the reply!

I replaced the motor and brushes, but not the controller. I've not had any smoke with this machine. I'm interested in seeing these videos though, in case they touch on what the problem may be.