Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Festool TKS 80 Issues  (Read 445 times)

0 Members and 1 Guest are viewing this topic.

Offline mark8par

  • Posts: 8
Festool TKS 80 Issues
« on: June 26, 2021, 05:17 AM »
Hi everyone,

I purchased a TKS 80 last week and had some issues from the off, i sent it back and received a second but same issues.

1. The table seemed to have a dip in the middle around the throat plate was flush - checked with straightedge.
2. The fence that came with it was not 90 degrees - checked with engineers square
3. The blade is not totally square, this is probably a result of the other issues.

Anyone else had these problems with it?

Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline rocky100370

  • Posts: 33
Re: Festool TKS 80 Issues
« Reply #1 on: June 26, 2021, 05:20 AM »
No issues with mine but now I will double check.

Offline mark8par

  • Posts: 8
Re: Festool TKS 80 Issues
« Reply #2 on: June 26, 2021, 05:42 AM »
No issues with mine but now I will double check.

Can you let me know how the check goes?

Cheers

Offline mark8par

  • Posts: 8
Re: Festool TKS 80 Issues
« Reply #3 on: June 26, 2021, 06:26 AM »
Some pictures i have taken


Offline jarbroen

  • Posts: 380
Re: Festool TKS 80 Issues
« Reply #4 on: July 23, 2021, 10:57 AM »
The dip in the table wouldn't be user correctable, but how about the fence and blade angle?  I don't have the TS80, but most saws have some adjustment capability for both of those.