Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Festool ro 150 E variable speed drifting  (Read 2760 times)

0 Members and 1 Guest are viewing this topic.

Offline Drdan

  • Posts: 2
Festool ro 150 E variable speed drifting
« on: December 08, 2018, 10:10 PM »
Hi,
I'm having a problem with my ro150 sander. As I use it the speed starts to slow by itself. I use it at 100% all the time so I would be happy if I can lock it at that. I have some ability technically and I read a post from festosnob saying he just tightened the screws on the rheostat to solve an issue like this. Can someone help me find these screws, or is there another solution to this issue? Or can I just lock the speed to 100% by disconnecting the potentiometer?
Thanks in advance.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Scott Burt

  • Magazine/Blog Author
  • *
  • Posts: 2005
  • painter/writer/educator
    • Prep to Finish
Re: Festool ro 150 E variable speed drifting
« Reply #1 on: December 08, 2018, 10:19 PM »
Before jumping to surgical conclusions, check to make sure that your plugit cord isn't expiring. Sometimes that can wonk out the speed on sanders.

Offline Alex

  • Posts: 7791
Re: Festool ro 150 E variable speed drifting
« Reply #2 on: December 09, 2018, 03:12 AM »
If you want you can take out the electronic module with the potmeter on it completely. It's only there to regulate the speed setting, nothing else, and if you take it out and bypass the connection the sander will work at 100% speed all the time.

The RO 150 E doesn't have a Plug-It cord, but the cord could have broken wires inside which could cause speed changes.

If your sander is well used, worn brushes can also be the problem, you get a bit of erratic behavior before they completely stop.


Offline Distinctive Interiors

  • Posts: 428
  • Modern Kitchen Specialist
    • distinterior.com
Re: Festool ro 150 E variable speed drifting
« Reply #3 on: December 09, 2018, 04:18 AM »
I was having similar symptoms as you Drdan on my RO150E. I thought, as Alex has suggested, that it was likely to be the brushes as they had never been changed since the sander was new.

I replaced the brushes and it has been fine ever since....

Offline Drdan

  • Posts: 2
Re: Festool ro 150 E variable speed drifting
« Reply #4 on: December 16, 2018, 04:00 PM »
Thanks guys, I'll have a look at the brushes first and let you know what happens. I really appreciate the responses!!!! Cheers!!!

Offline J_Mc

  • Posts: 1
Re: Festool ro 150 E variable speed drifting
« Reply #5 on: June 30, 2022, 12:15 AM »
Hi Drdan,

Just wondering whether you have an update on this issue as I’m in the same boat with mine. Thanks