Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Ets 125 Models mysterious aggressive operation  (Read 1359 times)

0 Members and 1 Guest are viewing this topic.

Offline artisanomaly

  • Posts: 1
Ets 125 Models mysterious aggressive operation
« on: January 19, 2021, 01:56 PM »
I’ve used festool sanders for awhile and I’ve never had an issue. I bought the new 125 model, loved it. Have used everything up to the Rotex, old and new. Talking 20+ sanders over a 10 year period (perks of working in a city shop). However I recently acquired one of the older ets 125 models and it’s out of control. Literally. I place it on a board and it wants to rip out of my hands. I chalked it up to the warped pad and replaced it with a nice flat one. However once I place it on a table top it’s all over the place and I can’t get it to float or sand even remotely smooth. Has anyone ever encountered a mechanical problem as such?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline Alex

  • Posts: 7801
Re: Ets 125 Models mysterious aggressive operation
« Reply #1 on: January 19, 2021, 03:57 PM »
Yes, I have encountered that mechanical problem.

Without having seen your sander, I have an incling it is not the pad, but the pad brake. The pad brake is a rubber ring that sits right above the pad and is fixed to the body of the sander. It is meant to slow the pad down to a workable speed. It is a wear item and it sounds like yours is worn. You can order a new one from any dealer or Festool directly if you're in the states.

Take your sander to a dealer to make sure.

See this diagram. You needs parts 21 and 22.

Offline Wood_Slice

  • Posts: 103
Re: Ets 125 Models mysterious aggressive operation
« Reply #2 on: February 22, 2021, 05:38 PM »
I have same issue. I have the Dewalt ROS and power wise seems close to the ETS EC 125/3 but when I used the Festool sander I feel like I have a belt sander in my hands, wants to jump all over the place and it shuts off at random intervals. At first I thought it was a built in safety feature if you put too much downward pressure it will shut off to protect sander/pad. However, I continued my testing with little to no pressure on top of the sander and it would still shut off at random times.

Per Festool (spoke today) this is a known issue with the ETS EC sanders and they are (I'm assuming) trying to figure out the cause. It will be a shame as I cannot use my new to me sander. I have to resort back to my Dewalt ROS (thankfully I didn't sell it/give it away).
DF 500 + Assortments | ETS EC 125/3 EQ | CT MIDI + CT-Fi| MFT3 + Elements| Installer's Set | TS55-REQ |