Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: Dust problems CS70 EB  (Read 309 times)

0 Members and 1 Guest are viewing this topic.

Offline mvmonster

  • Posts: 1
Dust problems CS70 EB
« on: November 12, 2019, 02:59 AM »
Hi members,

My Englisch is not perfect, but i try  ;)

I have a lot of problems with the dust on my CS70.
I use the CLT 26 E but this is not enough . I still have a lot of dust on my table and floor.
We use the Y-connector but when i feel the suction on the tubes, i am not impressed.

I cut mostly MDF and chipboard.

Somebody with the same problems ? What kind of dust collector do you use normaly for a CS70 ?

Thx !

Phil





Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline infer

  • Posts: 70
Re: Dust problems CS70 EB
« Reply #1 on: November 12, 2019, 06:48 AM »
The Y connector reduces suction too much. You need a high flow dust extractor. I have a CT26 on the 36mm hose and a Bosch Gas on the 26mm hose. If you can rig up an overhead blade guard/dust extractor it works even better.

Offline Alex

  • Posts: 6189
Re: Dust problems CS70 EB
« Reply #2 on: November 12, 2019, 07:42 AM »
I have had the CS70 for years now, not impressed by the dust collection at all. Always plenty of dust everywhere.

I have used my CTL22, CTL26 and CTL Mini with it. CTL26 works best because it had the best suction, but still dust remains. I have also occasionally used 2 vacs at the same time and that does improve the DC a lot, but still not 100%. Also, 2 vacs at the same time draws a lot of power, 4600 watts.