Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: DSC-AG 125 help!  (Read 413 times)

0 Members and 1 Guest are viewing this topic.

Offline Jackyturd

  • Posts: 1
DSC-AG 125 help!
« on: May 16, 2020, 09:07 AM »
Hi,
I’ve got a brand new diamond cutting system (DSC-AG 125), trying to channel a wall with it, but I’m only able to get a maximum drop depth of 15mm, I think the max depth should be 27. I can drop it to 15 mom, but then the motor is bumping with the wheel on the frame.
Can anyone shed some light on what I’m doing wrong? Or how to get it to drop further!

Cheers

Jack
« Last Edit: May 16, 2020, 09:10 AM by Jackyturd »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline neeleman

  • Posts: 1274
Re: DSC-AG 125 help!
« Reply #1 on: May 16, 2020, 09:37 AM »
I think you should detach the motorframe from the dustcap and rotate the handle a little upwards.
Then secure the frame again and it should work.
Festoolian since 1998.
FESTOOL:
RTSC400Li | CTL MIDI I | SYSROCK BR10 | SYSLITE KAL II | SV-SYS D14 | DSC-AG125FH | CDD9.6 | SYSLITE DUO | DF700 | HKC55 | TXS2.6 | CTL SYS | CXS2.6 | DWC18 | CTWings | BHC18 | CS50 | CMS-OF | MFT/3 | MFT/3-VL | KS120 | TS55 R | PSC420 | PS420 | BS75 | RAS115 | RO90 | RO150 | RS400 | RTS400 | RS300 | LS130 | DX93 | ETS150/5 | ETS150/3 | OF1010 | OF1400 | OFK500 | MFK700 | T18 | EHL65 | CTL26 | CTL22 | WCR1000 | D27-AS Plug-it | D36 UNI-RS | D36x7 | D50x2.5 | FS800 | FS800/2 | FS1080/2 | FS1400/2 (2x) | FS3000/2 | FSK250 | FSK420 | Gecko Dosh | Toolie | CE-SYS-2010 | RB-SYS CART (2x) | LEV1400 | LEV350 | SYS-MFT
PROTOOL:
CHP26 | PDC18 | FLC UNI | VCP260 | DSC-AGP125 | DSC-AGP230 | DSG-AGP125 | DRP16

Offline Holzhacker

  • Posts: 997
    • www.aic-chicago.com
Re: DSC-AG 125 help!
« Reply #2 on: May 16, 2020, 08:29 PM »
Sure wish they sold this here. I've got a job coming up where it would be great to have
"The Code is not a ceiling to reach but a floor to work up from"