Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: CT-36E Dust Collector Surging  (Read 211 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve1

  • Posts: 246
CT-36E Dust Collector Surging
« on: November 07, 2022, 11:32 AM »
I recently noticed my dust collector surging (dropping to low speed or perhaps off for a second, and then spooling up again for a few more seconds, then repeat).  Only seems to happen when I have my sander plugged in to the accessory port on the dust collector

I think its just that I had my sander on very low speed, and the sander was not drawing enough amps for the dust collector electronics to be sure if the sander was on or off.   I did notice that the dust collector does seem to need some minimum amps for the auto on/off to work - when I tried plugging my radio into the CT-36E "appliance socket", the auto on/off did not function at all.  Seemed to stop surging when I turned up the speed on my sander.

I am running through a Dust Deputy.  The bag is pretty new and almost empty.   The filter has some age (?) but I cleaned it pretty good.

Anybody else seen this ?

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.