Having trouble with your Festool power tool? Well, we're here to help you. Before posting to the forum, give us a chance to diagnose and resolve your issue. In the U.S. and Canada, call us toll-free at 888-337-8600 on Monday-Friday between 8a-5p EST or contact us via email at service@festoolusa.com. For other countries, please visit http://www.festool.com for contact information for your local Festool service department.

Author Topic: 1400 Dust Collection  (Read 373 times)

0 Members and 1 Guest are viewing this topic.

Offline eddingsm

  • Posts: 2
1400 Dust Collection
« on: May 24, 2020, 06:09 PM »
The dust collection attachment on the 1400 doesn't work, whatsoever, when using any sort of flattening or mortising bit when you have to rest the base above the surface of the work piece.  100% of the chips were exhausted out the side.  Spend $1000 on dust collection and is completely useless with the tool that creates the most waste.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline RKA

  • Posts: 1986
Re: 1400 Dust Collection
« Reply #1 on: May 24, 2020, 07:48 PM »
If you can’t keep the bit encapsulated so dust can only get into the collection hose, it will find any other path out.  You can mitigate this by planning your cut so the dust can’t escape under the base until the very end.  Flattening work is pretty much hopeless unless you create your own dust management like you see in CNC machines.  But something like that benefits from a high CFM dust collector to really be effective.