Author Topic: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer? (Read 3306 times)

Mat Provost · « **on:** January 18, 2019, 12:09 PM »

After checking out what other people are storing in their Systainers, we wanted to know what would you keep in your super sweet Festool 204534 Limited Edition SYS 2 TL Blue Systainer?

We only have a handful of these left, so grab yours before they're gone.
Festool 204534 Limited Edition SYS 2 TL Blue Systainer

*Disclaimer: No Animals or Burns Tools employees were hurt in the creation of these photos. Please be smart and don't keep Kittens, Rich and Tee Jay, or anything inappropriate in a Systainer.

ColossusX · « **Reply #1 on:** January 18, 2019, 01:54 PM »

I'm using mine to store my Makita 18v and my Milwaukee M18 and M12 batteries.

rst · « **Reply #2 on:** January 18, 2019, 08:55 PM »

Matt, that third photo is one "sweet" solution...pun intended. Collosusx, I keep three extra Milwaukee 18v batteries in a Mini III...fit perfectly.

Systainer.Store · « **Reply #3 on:** January 19, 2019, 08:35 AM »

Nice! I love it.

Mario Turcot · « **Reply #4 on:** January 21, 2019, 07:48 AM »

I got 4 and will be using them to store Domino accessories and tenons

Mat Provost · « **Reply #5 on:** January 23, 2019, 01:20 PM »

Quote from: rst on January 18, 2019, 08:55 PM

Matt, that third photo is one "sweet" solution...pun intended. Collosusx, I keep three extra Milwaukee 18v batteries in a Mini III...fit perfectly.

It was pretty sweet... Num num num. It's good that you and CollosusX are staying positive with your charged Systainers. Smart.

Mario, how are you keeping everything separated? If you have a photo, please share.

Mario Turcot · « **Reply #6 on:** January 23, 2019, 10:14 PM »

Quote from: Mat Provost on January 23, 2019, 01:20 PM

Quote from: rst on January 18, 2019, 08:55 PM
Matt, that third photo is one "sweet" solution...pun intended. Collosusx, I keep three extra Milwaukee 18v batteries in a Mini III...fit perfectly.

It was pretty sweet... Num num num. It's good that you and CollosusX are staying positive with your charged Systainers. Smart.

Mario, how are you keeping everything separated? If you have a photo, please share.

I just received them last week. I will make dividers, I believe @Sparktrician post a similar solution for sandpapers and will do pretty much the same for tenons. Will post a picture when done

Here the thread I will probably make them with 3 dividers per systainers.

Master Carpenter · « **Reply #7 on:** January 24, 2019, 12:31 AM »

A cleaverly disguised ad to sell limited edition systainers from a dealer with 5 posts?

SRSemenza · « **Reply #8 on:** January 24, 2019, 12:55 AM »

Nothing wrong with a dealer signing up and posting on FOG. Along with posts for selling in the Sales and Dealer board.

Only five posts, well you gotta start somewhere after you sign up.

Dealer participation on FOG has always been encouraged especially when it goes beyond sales into customer service and general help with tool information.

Seth

Mario Turcot · « **Reply #9 on:** January 24, 2019, 06:45 AM »

Quote from: SRSemenza on January 24, 2019, 12:55 AM

Dealer participation on FOG has always been encouraged especially when it goes beyond sales into customer service and general help with tool information.

Seth

Just think about Hans & Eric @TSO Products and all the contribution they bring

Mat Provost · « **Reply #10 on:** January 28, 2019, 10:20 AM »

Quote from: Master Carpenter on January 24, 2019, 12:31 AM

A cleaverly disguised ad to sell limited edition systainers from a dealer with 5 posts?

I've been trying to sell Tee Jay and Rich for a while now, but their beards don't seem to be as appealing as one would hope. We ran a poll on Facebook and 69% voted for them though... Not sure what the says.

Zach Burns has been on the Forum since 2007 but hasn't been able to post as much as he would like, so I'm working on being more active. We've also been an Authorized Festool Dealer since 2003 - So that's gotta count for something, right?

Thanks for saying it's cleaver though, appreciate the compliment.

Mat Provost · « **Reply #11 on:** January 28, 2019, 10:24 AM »

Quote from: Mario Turcot on January 23, 2019, 10:14 PM

Quote from: Mat Provost on January 23, 2019, 01:20 PM
Quote from: rst on January 18, 2019, 08:55 PM
Matt, that third photo is one "sweet" solution...pun intended. Collosusx, I keep three extra Milwaukee 18v batteries in a Mini III...fit perfectly.

It was pretty sweet... Num num num. It's good that you and CollosusX are staying positive with your charged Systainers. Smart.

Mario, how are you keeping everything separated? If you have a photo, please share.

I just received them last week. I will make dividers, I believe @Sparktrician post a similar solution for sandpapers and will do pretty much the same for tenons. Will post a picture when done

Here the thread I will probably make them with 3 dividers per systainers.

Are you going to be using a template or are you building off your own dimensions? I saw on the other post that people were asking for them.

Mario Turcot · « **Reply #12 on:** January 28, 2019, 10:28 AM »

No real template, as simple as it can get. I have the bottom CNC'ed from Raync file (if I recall correctly) and will attach the dividers to it for easy removal. Right now it's sitting in a corner in my head. No draft yet

Mat Provost · « **Reply #13 on:** January 28, 2019, 10:33 AM »

Quote from: Mario Turcot on January 28, 2019, 10:28 AM

No real template, as simple as it can get. I have the bottom CNC'ed from Raync file (if I recall correctly) and will attach the dividers to it for easy removal. Right now it's sitting in a corner in my head. No draft yet

Isn't that where most soon-to-be-amazing ideas reside? I have a few ruminating myself.

Cheese · « **Reply #14 on:** January 29, 2019, 10:46 AM »

I keep my set of Vac Sys heads in their original Systainer on top of my CT 22. The problem is, whenever I place another T-Loc Systainer on top, sooner or later it slides off the top.

I decided to put the Vac Sys heads in the Limited Edition and then I can lock everything down with the T-Locs.

What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

[ Specified attachment is not available ]

Mario Turcot · « **Reply #15 on:** January 29, 2019, 11:56 AM »

@Cheese but but, how do you know what's inside. You haven't put the correct label yet

Cheese · « **Reply #16 on:** January 29, 2019, 12:11 PM »

Quote from: Mario Turcot on January 29, 2019, 11:56 AM

@Cheese but but, how do you know what's inside. You haven't put the correct label yet

LOL...but Mario, these days I'm relying less on small labels using an 18 font and more on colors of Systainers & T-Locs that I can see from across the room.

You're right however, I do need to label that Systainer so that all of my handles match.

Mat Provost · « **Reply #17 on:** March 06, 2019, 11:12 AM »

Hey all,

Just want to let everyone know that we only have 6 of these left in stock. You can grab yours here: https://www.burnstools.com/204534-sys-2-tl-blue-systainer-limited

Thank you!

Author Topic: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer? (Read 3306 times)

Mat Provost

What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

ColossusX

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

rst

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Systainer.Store

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mario Turcot

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mat Provost

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mario Turcot

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Master Carpenter

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

SRSemenza

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mario Turcot

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mat Provost

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mat Provost

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mario Turcot

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mat Provost

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Cheese

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mario Turcot

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Cheese

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?

Mat Provost

Re: What would you keep in your Super Sweet Limited Edition SYS 2 TL Blue Systainer?