Author Topic: Track Storage  (Read 4456 times)

0 Members and 1 Guest are viewing this topic.

Offline tallgrass

  • Posts: 978
Re: Track Storage
« Reply #30 on: April 17, 2021, 05:58 AM »
I use the Makita strip. IT works extremely well.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Vondawg

  • Posts: 429
Re: Track Storage
« Reply #31 on: April 17, 2021, 07:50 AM »
« Last Edit: April 17, 2021, 08:00 AM by Vondawg »
There are no mistakes....just new designs.

Offline afish

  • Posts: 556
Re: Track Storage
« Reply #32 on: April 25, 2021, 06:33 PM »
Nice rack.

I discovered, this winter, that one of the reasons that the splinter strip comes off is doing the initial cut according to Festool's video. They say not to worry about cutting the ends.

They say that? I cut the strip flush on both ends on my previous track.

If they say that they are full of it. I had a LR32 rail that I NEVER used for cutting and the clear strip was never cut/trimmed or hardly ever even touched.  It only took about 6 months before it started peeling off.  THe only thing that might work to keep those on is 3M VHB primer.  We used to use it at my old shop and that stuff is pretty amazing when done correctly.  I have used the primer a few times when not using the VHB and it seems to work well helping other adhesives stick.  Its nasty stuff so make sure you use it outside.

Offline pettyconstruction

  • Posts: 663
Re: Track Storage
« Reply #33 on: April 25, 2021, 07:44 PM »
Are the Festool rail bags available in anything larger than 1400/55"? That's all I've seen.
Festool bags=1400 only....but Lee Valley sells guild rail bags, about $80 for the long one...very good quality

https://www.leevalley.com/en-us/shop/tools/workshop/carrying-and-moving/110983-lee-valley-track-saw-guide-rail-bag-for-3000mm-120-inch-guide-rail?item=50K6042&utm_source=free_google_shopping&utm_medium=organic&utm_campaign=shopping_feed&gclid=EAIaIQobChMIzbSk7pyF8AIVz21vBB0CBQaBEAQYAiABEgL68PD_BwE
Fastcap has a rail bag also,fits up to a 1900 rail
Charlie


Sent from my iPad using Tapatalk Pro