Author Topic: Template for dovetail joints for beams  (Read 1015 times)

0 Members and 1 Guest are viewing this topic.

Offline zoki4691

  • Posts: 51
Template for dovetail joints for beams
« on: October 17, 2019, 04:12 PM »
The template for dovetail joints for the beams.
I love carpentry work and if I can reproduce this template (original and aluminum) I will be very happy.
Of course, I wanted to do measurements x my needs. Make a template  for interlocking for joists, then the measures contained.
I already have right milling, I have the cutter with driving bearing, it just lacks the dima.
Construction material and birch phenolic plywood plywood

305570-0
[ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ]
« Last Edit: October 17, 2019, 05:10 PM by zoki4691 »
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Cheese

  • Posts: 6527
Re: Template for dovetail joints for beams
« Reply #1 on: October 17, 2019, 05:47 PM »
Nice job...the phenolic version of the aluminum Arunda system for a lot less than $3300. [smile]

https://www.timberwolftools.com/arunda-dovetailing-mortise-and-tenon-system

Offline zoki4691

  • Posts: 51
Re: Template for dovetail joints for beams
« Reply #2 on: October 18, 2019, 05:55 AM »
More photos...
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline blaszcsj

  • Posts: 463
  • I like building stuff with my hands.
Re: Template for dovetail joints for beams
« Reply #3 on: October 18, 2019, 12:10 PM »
@zoki4691 did you make this pattern or buy it? I am interested in one as well.
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TSC55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII | Syslite STL 450 | RAS 115 E | OF2200 EB

Offline zoki4691

  • Posts: 51
Re: Template for dovetail joints for beams
« Reply #4 on: October 18, 2019, 12:20 PM »
@zoki4691 did you make this pattern or buy it? I am interested in one as well.

If you're interested, I'm going to sell it? I did some paterns
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline blaszcsj

  • Posts: 463
  • I like building stuff with my hands.
Re: Template for dovetail joints for beams
« Reply #5 on: October 18, 2019, 04:01 PM »
@zoki4691 did you make this pattern or buy it? I am interested in one as well.

If you're interested, I'm going to sell it? I did some paterns

Id be interested in purchasing a set for a pergola build in the spring. 
OF1010 EQ Router | MFT/3 | DF500Q | Carvex 420 | ETS EC 150/3 | CT 36 Auto Clean | TSC55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII | Syslite STL 450 | RAS 115 E | OF2200 EB

Offline Gregor

  • Posts: 1452
Re: Template for dovetail joints for beams
« Reply #6 on: October 19, 2019, 04:59 AM »
Nice.

Will you share the process of making the templates?

Offline zoki4691

  • Posts: 51
Re: Template for dovetail joints for beams
« Reply #7 on: October 19, 2019, 06:03 AM »
Nice.

Pocess Is Biesse Rover 325 [smile]
(Attachment Link)

Will you share the process of making the templates?
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline Gregor

  • Posts: 1452
Re: Template for dovetail joints for beams
« Reply #8 on: October 19, 2019, 06:12 AM »
Will have to pass on that as I don't have enough space in my shop  [sad]

Offline Bob D.

  • Posts: 1354
Re: Template for dovetail joints for beams
« Reply #9 on: October 19, 2019, 06:26 AM »
That is a monster bit (#492667). I searched but does not appear to be available in NA. I see the shaft is 12mm. Is a 12mm collet available for the OF1400, I didn't see one in the current Festool catalog.
-----
It's a table saw, do you know where your fingers are?

Offline Gregor

  • Posts: 1452
Re: Template for dovetail joints for beams
« Reply #10 on: October 19, 2019, 06:29 AM »
That is a monster bit (#492667). I searched but does not appear to be available in NA. I see the shaft is 12mm. Is a 12mm collet available for the OF1400, I didn't see one in the current Festool catalog.
The 12mm collet for OF 1400/2200 is #494462 (Spannzange SZ-D 12,0/OF 1400/2000/2200).
« Last Edit: October 19, 2019, 06:35 AM by Gregor »