« previous next »
Pages: [1]   Go Down

Author Topic: SVG file for Systainer base  (Read 4530 times)

0 Members and 1 Guest are viewing this topic.

Offline Dusty.Tools

  • Retailer
  • *
  • Posts: 336
    • Dusty.Tools
SVG file for Systainer base
« on: June 14, 2020, 03:23 PM »
Hi All,

Does anyone have an SVG or equivalent file for the feet of a Systainer?

I plan to CNC feet holes into plywood for some drawers...

Cheers

Ben


Sent from my iPhone using Tapatalk
Logged
@dusty.tools
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Offline TSO_Products

  • Retailer
  • *
  • Posts: 531
    • TSO Products LLC
Re: SVG file for Systainer base
« Reply #1 on: June 14, 2020, 05:08 PM »
@Dusty -  send me an email so I can forward you a SolidWorks STEP file of the SYSTAINER hole pattern

Hans
hans@tsoproducts.com
Logged

Offline Dusty.Tools

  • Retailer
  • *
  • Posts: 336
    • Dusty.Tools
Re: SVG file for Systainer base
« Reply #2 on: June 14, 2020, 06:46 PM »
Thanks :)


Sent from my iPhone using Tapatalk
Logged
@dusty.tools

Offline luvwood

  • Posts: 4
Re: SVG file for Systainer base
« Reply #3 on: June 22, 2020, 11:58 AM »
@Dusty.Tools You may not need it after Hans post above, but I noticed that you are using a Shapeoko.  I have a Vectric VCarve file that I created and used to cut shelves on a Shapeoko, if you need it.
Logged

Offline Dusty.Tools

  • Retailer
  • *
  • Posts: 336
    • Dusty.Tools
Re: SVG file for Systainer base
« Reply #4 on: June 22, 2020, 01:46 PM »
Quote from: luvwood on June 22, 2020, 11:58 AM
@Dusty.Tools You may not need it after Hans post above, but I noticed that you are using a Shapeoko.  I have a Vectric VCarve file that I created and used to cut shelves on a Shapeoko, if you need it.
Yes please. That would be even better!


Sent from my iPhone using Tapatalk
Logged
@dusty.tools

Offline odessaboots

  • Posts: 27
Re: SVG file for Systainer base
« Reply #5 on: June 22, 2020, 02:32 PM »
Quote from: TSO_Products on June 14, 2020, 05:08 PM
@Dusty -  send me an email so I can forward you a SolidWorks STEP file of the SYSTAINER hole pattern

Hans
hans@tsoproducts.com

Can I get that as well?
Logged

Offline luvwood

  • Posts: 4
Re: SVG file for Systainer base
« Reply #6 on: June 22, 2020, 05:53 PM »
Quote from: Dusty.Tools on June 22, 2020, 01:46 PM
Quote from: luvwood on June 22, 2020, 11:58 AM
@Dusty.Tools You may not need it after Hans post above, but I noticed that you are using a Shapeoko.  I have a Vectric VCarve file that I created and used to cut shelves on a Shapeoko, if you need it.
Yes please. That would be even better!


Sent from my iPhone using Tapatalk

email sent.  let me know if you don't receive it.
Logged

Offline AtomicRyan

  • Magazine/Blog Author
  • *
  • Posts: 90
Re: SVG file for Systainer base
« Reply #7 on: June 22, 2020, 09:01 PM »
I've got one too if ya need it...
Logged

Offline odessaboots

  • Posts: 27
Re: SVG file for Systainer base
« Reply #8 on: June 22, 2020, 09:07 PM »
Quote from: AtomicRyan on June 22, 2020, 09:01 PM
I've got one too if ya need it...

Can you share it?
Logged

Offline Stanw

  • Posts: 1
Re: SVG file for Systainer base
« Reply #9 on: October 17, 2020, 09:30 PM »
May I have a copy of your V-carve file? I just picked up a mini and and want to attach a custom tray to it.

Thanks, Stan W
Logged

Offline sylthecru

  • Posts: 52
Re: SVG file for Systainer base
« Reply #10 on: April 21, 2023, 10:44 AM »
I know it has been a few years but if you are still here are you willing to share the vcarve file for the systainer?
Logged
TS55 REQ, Mini Dust Extractor, OF1400, DF500 Domino, MFT/3, LR32, RO125, Kapex, CT 36, CMS, Carvex

Offline Crazyraceguy

  • Posts: 3286
Re: SVG file for Systainer base
« Reply #11 on: April 21, 2023, 06:02 PM »
FWIW, I think there is one on the Shaper Origin site. It would be an SVG file, if you can use that.
Logged
CSX
DF500 + assortment set
PS420 + Base kit
OF1010
OF1010F
OF1400
MFK700 (2)
TS55,FS800, FS1080, FS1400/ LR32, FS1900, FS 2424/ LR32, FS3000
CT26E + Workshop cleaning set, Bluetooth remote
CT15
RO90
RO125
ETS EC 125
RAS115
ETS 125 (2)
RTS 400
TS75
Shaper Origin/Workstation/Plate
MFT clamps set
Installers set
Centrotech organizer set
Socket/Ratchet set
Pliers set
TS60
Pages: [1]   Go Up
« previous next »