Author Topic: Recommend 3D Prints....  (Read 1147 times)

0 Members and 1 Guest are viewing this topic.

Offline Dusty.Tools

  • Posts: 273
    • Dusty.Tools
Recommend 3D Prints....
« on: April 20, 2020, 12:55 AM »
Hi All,

I thought I'd start a thread on people's favorite 3D printed accessories for your workshop. I'm really interested to see what people are playing with....

Cheers

Ben
@dusty.tools

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline ben_r_

  • Posts: 1295
Re: Recommend 3D Prints....
« Reply #1 on: April 20, 2020, 01:07 AM »
What printer do you have?
If at first you don't succeed, redefine success!

Offline WillAdams

  • Posts: 58
Re: Recommend 3D Prints....
« Reply #2 on: April 20, 2020, 09:48 AM »
Mostly I just make fixtures for cutting, drilling, and filing --- the "grain" of 3D printing doesn't appeal for anything which would merit keeping --- and initial prototypes.

Offline Dusty.Tools

  • Posts: 273
    • Dusty.Tools
Re: Recommend 3D Prints....
« Reply #3 on: April 20, 2020, 07:46 PM »
What printer do you have?

I have the Prusa MK3S with the multiple color addon (MMU). I was having lots of problems so I disabled the MMU whilst I figured it out.

I am now confidentially printing single color so I should get that working as well
@dusty.tools

Offline rvieceli

  • Posts: 1150
Re: Recommend 3D Prints....
« Reply #4 on: April 20, 2020, 08:36 PM »
@Dusty.Tools Prusa and most of the other 3D printer makers currently have a big project world wide for their community printing face shield PPE for medical workers.

Here is some info:

https://blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days/

Ron

Offline Dusty.Tools

  • Posts: 273
    • Dusty.Tools
Re: Recommend 3D Prints....
« Reply #5 on: April 20, 2020, 08:48 PM »
@Dusty.Tools Prusa and most of the other 3D printer makers currently have a big project world wide for their community printing face shield PPE for medical workers.

Here is some info:

https://blog.prusaprinters.org/from-design-to-mass-3d-printing-of-medical-shields-in-three-days/

Ron
Yeah I’ve played with that, I have PLA printing really well but not PETG.


Sent from my iPhone using Tapatalk
@dusty.tools

Offline ben_r_

  • Posts: 1295
Re: Recommend 3D Prints....
« Reply #6 on: April 22, 2020, 08:45 PM »
What printer do you have?

I have the Prusa MK3S with the multiple color addon (MMU). I was having lots of problems so I disabled the MMU whilst I figured it out.

I am now confidentially printing single color so I should get that working as well
Nice. Ive got a couple of those and a third on the way. Working on adding the MMU2S to one of them now acutually. 3D printing is addicting and super fun!
If at first you don't succeed, redefine success!

Offline tywalt

  • Posts: 7
Re: Recommend 3D Prints....
« Reply #7 on: April 29, 2020, 05:18 PM »
https://www.thingiverse.com/thing:1129675
these are great "male" feet for a custom systainer top.  Printed a few sets and never had an issue.  Bit tricky to align, but if you own festool tools... you probably know how to lay out accurately.

https://www.thingiverse.com/thing:2840884
these are the best "female" mounts I've found.  Again a bit tricky to align but I like them more than the few others I've tried that have an installation jig.

Working on a vac hose deflector piece for the end of a guide rail.  Would be curious to know if anyone has found an existing design they like though.