« previous next »
Pages: [1]   Go Down

Author Topic: Template for dovetail joints for beams  (Read 8118 times)

0 Members and 1 Guest are viewing this topic.

Offline zoki4691

  • Posts: 51
Template for dovetail joints for beams
« on: October 17, 2019, 04:12 PM »
The template for dovetail joints for the beams.
I love carpentry work and if I can reproduce this template (original and aluminum) I will be very happy.
Of course, I wanted to do measurements x my needs. Make a template  for interlocking for joists, then the measures contained.
I already have right milling, I have the cutter with driving bearing, it just lacks the dima.
Construction material and birch phenolic plywood plywood

305570-0
[ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ] [ Specified attachment is not available ]
« Last Edit: October 17, 2019, 05:10 PM by zoki4691 »
Logged
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200
Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.

Online Cheese

  • Posts: 11039
Re: Template for dovetail joints for beams
« Reply #1 on: October 17, 2019, 05:47 PM »
Nice job...the phenolic version of the aluminum Arunda system for a lot less than $3300. [smile]

https://www.timberwolftools.com/arunda-dovetailing-mortise-and-tenon-system
Logged

Offline zoki4691

  • Posts: 51
Re: Template for dovetail joints for beams
« Reply #2 on: October 18, 2019, 05:55 AM »
More photos...
Logged
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline StanB

  • Posts: 578
  • I like building stuff with my hands.
Re: Template for dovetail joints for beams
« Reply #3 on: October 18, 2019, 12:10 PM »
@zoki4691 did you make this pattern or buy it? I am interested in one as well.
Logged
OF1010 EQ Router | MFT/3 | DF500Q | Mafell P1CC | ETS EC 150/3 | CT 36 Auto Clean | TSC55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII | Syslite STL 450 | RAS 115 E | OF2200 EB | OSC 18 Vectoro | VAC SYS SYSTEM S ET | MX 1200 E MIXER | DF700 XL | PDC 18 | TID 18 | ConuoroKA 65  | Kapex KS120 REB | MFK700| RTSC 400 | LS 130 EQ

Offline zoki4691

  • Posts: 51
Re: Template for dovetail joints for beams
« Reply #4 on: October 18, 2019, 12:20 PM »
Quote from: blaszcsj on October 18, 2019, 12:10 PM
@zoki4691 did you make this pattern or buy it? I am interested in one as well.

If you're interested, I'm going to sell it? I did some paterns
Logged
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline StanB

  • Posts: 578
  • I like building stuff with my hands.
Re: Template for dovetail joints for beams
« Reply #5 on: October 18, 2019, 04:01 PM »
Quote from: zoki4691 on October 18, 2019, 12:20 PM
Quote from: blaszcsj on October 18, 2019, 12:10 PM
@zoki4691 did you make this pattern or buy it? I am interested in one as well.

If you're interested, I'm going to sell it? I did some paterns

Id be interested in purchasing a set for a pergola build in the spring. 
Logged
OF1010 EQ Router | MFT/3 | DF500Q | Mafell P1CC | ETS EC 150/3 | CT 36 Auto Clean | TSC55 | LR32 | OF1400 EQ Router | ZOBO Metric Set | CXS Li 2.6 - 90 Limited Edition | Universal Cleaning Set | HKC55 | Centrotec CE-SORT | RO150 FEQ | DTS 400 | RO90 DX | CTSYS | C18 Drill | SysLite KALII | Syslite STL 450 | RAS 115 E | OF2200 EB | OSC 18 Vectoro | VAC SYS SYSTEM S ET | MX 1200 E MIXER | DF700 XL | PDC 18 | TID 18 | ConuoroKA 65  | Kapex KS120 REB | MFK700| RTSC 400 | LS 130 EQ

Offline Gregor

  • Posts: 1778
Re: Template for dovetail joints for beams
« Reply #6 on: October 19, 2019, 04:59 AM »
Nice.

Will you share the process of making the templates?
Logged

Offline zoki4691

  • Posts: 51
Re: Template for dovetail joints for beams
« Reply #7 on: October 19, 2019, 06:03 AM »
Quote from: Gregor on October 19, 2019, 04:59 AM
Nice.

Pocess Is Biesse Rover 325 [smile]
(Attachment Link)

Will you share the process of making the templates?
Logged
You must not use the money as a your only wealth ,,,
My Festo :   PS 2 , ET 2 , CDD 9.6 ,HL 850 , SR 201 E-AS , AT 65 EB , DX 93 E , RS 100 , RS 400  e
My Festool :  PS 300 trion, PS 400 Carvex  , CTL 48 E ,   DF 700 , RO 150 ,OFK  500 , OFK 700 , RG 150 , TDK 15.6 , CS70 , CMS , OF 1010 , OF 2200 ,HK 55 EBQ , TS 55 REBQ , PL 205 E , SSU 200

Offline Gregor

  • Posts: 1778
Re: Template for dovetail joints for beams
« Reply #8 on: October 19, 2019, 06:12 AM »
Will have to pass on that as I don't have enough space in my shop  [sad]
Logged

Offline Bob D.

  • Inactive Member
  • *
  • Posts: 3014
    • My Cordless Workshop
Re: Template for dovetail joints for beams
« Reply #9 on: October 19, 2019, 06:26 AM »
That is a monster bit (#492667). I searched but does not appear to be available in NA. I see the shaft is 12mm. Is a 12mm collet available for the OF1400, I didn't see one in the current Festool catalog.
Logged
-----
It's a table saw, do you know where your fingers are?

Offline Gregor

  • Posts: 1778
Re: Template for dovetail joints for beams
« Reply #10 on: October 19, 2019, 06:29 AM »
Quote from: Bob D. on October 19, 2019, 06:26 AM
That is a monster bit (#492667). I searched but does not appear to be available in NA. I see the shaft is 12mm. Is a 12mm collet available for the OF1400, I didn't see one in the current Festool catalog.
The 12mm collet for OF 1400/2200 is #494462 (Spannzange SZ-D 12,0/OF 1400/2000/2200).
« Last Edit: October 19, 2019, 06:35 AM by Gregor »
Logged

Offline Rperry6567

  • Posts: 2
Re: Template for dovetail joints for beams
« Reply #11 on: August 06, 2020, 01:48 PM »
Let me know if you are going to sell the templates.  I am interested.  Please let me know where to find this information.
Logged

Offline Karl_Winters

  • Posts: 1
Re: Template for dovetail joints for beams
« Reply #12 on: January 01, 2021, 07:50 PM »
I want to make a set to or buy a set. Please contract me asap. I will buy a set or buy the plans to have a set made locally.  Please.

Sent from my SM-G928W8 using Tapatalk

Logged

Offline paxetbonum

  • Posts: 1
Re: Template for dovetail joints for beams
« Reply #13 on: January 23, 2021, 06:25 AM »
Very nice job!
As i have to build a pergola for a friend, i would be very interested in buying the templates!
What is the reference for the first bit you use (with a 15° angle)?
Logged

Offline mkasdin

  • Posts: 478
Re: Template for dovetail joints for beams
« Reply #14 on: January 23, 2021, 12:56 PM »
Quote from: zoki4691 on October 19, 2019, 06:03 AM
Quote from: Gregor on October 19, 2019, 04:59 AM
Nice.

Pocess Is Biesse Rover 325 [smile]
(Attachment Link)

Will you share the process of making the templates?
it’s nice. Plans or template would be nice. I could see myself nicking and ruining the template with the large bits. With plans I could just rout out a another one if I break the template. I don’t have an immediate use for it but things change.
Logged

Offline Rperry6567

  • Posts: 2
Re: Template for dovetail joints for beams
« Reply #15 on: September 12, 2021, 11:26 AM »
Any updates on making custom templates.  Looking for a template for 2x10s to dovetail on beams for a covered pergola build.
Logged

Online Cheese

  • Posts: 11039
Re: Template for dovetail joints for beams
« Reply #16 on: September 12, 2021, 12:05 PM »
Quote from: Rperry6567 on September 12, 2021, 11:26 AM
Any updates on making custom templates.  Looking for a template for 2x10s to dovetail on beams for a covered pergola build.

@zoki4691
Logged

Offline Bob D.

  • Inactive Member
  • *
  • Posts: 3014
    • My Cordless Workshop
Re: Template for dovetail joints for beams
« Reply #17 on: September 12, 2021, 09:27 PM »
Looks like it's been a year since he was last on here.
Logged
-----
It's a table saw, do you know where your fingers are?

Offline chalojak

  • Posts: 1
Re: Template for dovetail joints for beams
« Reply #18 on: August 14, 2023, 05:07 AM »
Hi guys,
you may need to use some google translate, but templates for dovetail joints that can be even 3D printed are here:
https://www.lairdubois.fr/plans/1739-gabarits-pour-queue-daronde-sur-poutre.html

Cheers
Logged
Pages: [1]   Go Up
« previous next »