Author Topic: Domino Joiner DF500 handle  (Read 857 times)

0 Members and 1 Guest are viewing this topic.

Offline ChuckM

  • Posts: 2395
Domino Joiner DF500 handle
« on: January 20, 2021, 07:18 PM »
Finally I found time to add a handle to the DF500, using one of the plane handles lying around, which were bought at the local Lee Valley store  (Clearance Corner) a few years back. I know other people have tried that and liked it.

For the usual projects (say, only double digits of mortises to mill), I won't need the handle, but for a big joinery task, I think the handle will come handy. For now, it sits detached in the systainer.
« Last Edit: January 20, 2021, 07:24 PM by ChuckM »

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Birdhunter

  • Posts: 3355
  • Woodworker, Sportsman, Retired
Re: Domino Joiner DF500 handle
« Reply #1 on: January 20, 2021, 08:51 PM »
For me, that would result in torquing the Domino down and screwing up the mortise or trapping the cutter.
Birdhunter

Offline ChuckM

  • Posts: 2395
Re: Domino Joiner DF500 handle
« Reply #2 on: January 20, 2021, 09:35 PM »
Yes, that could happen if the hand holding the handle or barrel (normal use) is pushing down as well when pushing forward.

When I use the DF500, my focus/downward pressure is always on the hand at the front, and the hand at the back is a loose grip on the barrel with the force directed straightforward. I never look at the barrel or the dominant hand when using the joiner. A loose grip also makes the milling process less tiring on the hand when I have a lot to mortise/push. I also find that if I place my arm closer to my body, I have absolute control of the machine in terms of pushing angle and speed.

I gave the handle a few dry runs; the pushing felt easier. The key here is a loose grip on the handle, resting the hand (little finger to the wrist) comfortably on the base of the handle and the barrel as I push. It's like using a rabbet plane or plow plane with a gentle grip on the handle when pushing to avoid tilting the plane -- a common mistake when people charge their planes forward with a tight grip.
« Last Edit: January 20, 2021, 09:42 PM by ChuckM »

Offline Rhino1789

  • Posts: 55
Re: Domino Joiner DF500 handle
« Reply #3 on: January 20, 2021, 10:27 PM »
I’m intrigued by your little domino sample guide. Can you tell us more about that. It seems like a great idea.

Offline clark_fork

  • Posts: 287
Clark Fork

"A lot of people are afraid of heights. Not me, I'm afraid of widths."  Stephen Wright

"straight, smooth and square" Mr. Russell, first day high school shop class-1954

" What's the good of it?" My Sainted Grandmother

"You can't be too rich, too thin or have too many clamps." After my introduction to pocket joinery and now the MFT work process

"Don't make something unless it is both made necessary and useful; but if it is both necessary and useful,
don't hesitate to make it beautiful." -- Shaker dictum

Offline ChuckM

  • Posts: 2395
Re: Domino Joiner DF500 handle
« Reply #5 on: January 21, 2021, 10:30 AM »
There was a discussion on that on this forum?!

I came across the block on Pinterest, and made one to hold the small wrench as well.
« Last Edit: January 21, 2021, 10:33 AM by ChuckM »