Author Topic: DIY MFT Guide Rail Support Brackets - continued  (Read 1319 times)

0 Members and 1 Guest are viewing this topic.

Offline Dusty.Tools

  • Posts: 130
    • Dusty.Tools
DIY MFT Guide Rail Support Brackets - continued
« on: June 27, 2019, 02:16 AM »
Hi all,

The previous discussion on this is busted:

http://festoolownersgroup.com/festool-jigs-tool-enhancements/post-your-diy-mft-guide-rail-support-brackets/new/?topicseen#new

One of the last posts was a list of recommended 80/20 parts. I was wondering if someone could repost the details?

Thanks

Ben


——————————
dusty.tools
@dusty.tools

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline macrutt

  • Posts: 25
Re: DIY MFT Guide Rail Support Brackets - continued
« Reply #1 on: June 27, 2019, 02:32 AM »

Offline Dusty.Tools

  • Posts: 130
    • Dusty.Tools
Re: DIY MFT Guide Rail Support Brackets - continued
« Reply #2 on: June 27, 2019, 02:36 AM »
Perfect thank you!!!


——————————
dusty.tools
@dusty.tools

Offline GarryMartin

  • Posts: 1809
Re: DIY MFT Guide Rail Support Brackets - continued
« Reply #3 on: June 27, 2019, 02:38 AM »
@DustyTools

Not sure what's going on with that post, but I found if you reply to a post that's part of it, you can see the rest of the thread.

Try this link http://festoolownersgroup.com/festool-jigs-tool-enhancements/post-your-diy-mft-guide-rail-support-brackets/msg581729/?action=post

Offline Dusty.Tools

  • Posts: 130
    • Dusty.Tools
Re: DIY MFT Guide Rail Support Brackets - continued
« Reply #4 on: June 28, 2019, 09:40 PM »
@DustyTools

Not sure what's going on with that post, but I found if you reply to a post that's part of it, you can see the rest of the thread.

Try this link http://festoolownersgroup.com/festool-jigs-tool-enhancements/post-your-diy-mft-guide-rail-support-brackets/msg581729/?action=post
Thanks @GarryMartin
@dusty.tools