Author Topic: Work Center WCR-1000 mounted to a FLEX vac  (Read 1575 times)

0 Members and 1 Guest are viewing this topic.

Offline DynaGlide

  • Posts: 1143
Work Center WCR-1000 mounted to a FLEX vac
« on: March 07, 2021, 02:30 PM »
I wanted to put my CT26 under the MFT which left me with deciding what to do with the work center. This is probably the overkill solution but it works for me. It's not the most stable thing in the world but should be fine for my use.











Instagram @matts.garage

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline guybo

  • Posts: 201
Re: Work Center WCR-1000 mounted to a FLEX vac
« Reply #1 on: March 07, 2021, 04:35 PM »
Hi, I found these spare parts very helpful, guy

Offline festal

  • Posts: 98
Re: Work Center WCR-1000 mounted to a FLEX vac
« Reply #2 on: September 04, 2021, 10:24 AM »
@DynaGlide does workcenter fit on top of the flex vce without systainers in between?  I want to have my ct-cyclone between the top and bottom of the workcenter

Online squall_line

  • Posts: 1061
Re: Work Center WCR-1000 mounted to a FLEX vac
« Reply #3 on: September 04, 2021, 12:20 PM »
@DynaGlide does workcenter fit on top of the flex vce without systainers in between?  I want to have my ct-cyclone between the top and bottom of the workcenter

My understanding of why the Sys-sort is in between the Flex and the Workcenter is to "convert" the Classic Systainer attachments into a T-Loc compatible attachment style (it's also a handy storage solution, obviously).  Then the board is there to mount the Workcenter because the Workcenter doesn't mount directly to a normal T-Loc or Classic attachment.

The Workcenter base is shaped specifically to mate up with a CT-26, 36, or 48 but not to a Midi, Mini, Midi-I, Mini-I, nor CT-15.  You also can't mount a Workcenter directly on a Classic Systainer (I learned this the hard way with the MIDI-I, so I ended up with a CT-26, and I just tried it on a Classic Systainer about 5 minutes ago to make sure I wasn't speaking out of turn).

If you didn't already know, the CT-VA-20 (cyclone) definitely fits in the Workcenter, but if I understand your concern, it's more about getting the right height for the hose to reach.

Offline festal

  • Posts: 98
Work Center WCR-1000 mounted to a FLEX vac
« Reply #4 on: September 04, 2021, 12:22 PM »
It’s both height of the hose and mounting it to flex vacuum

Thought of getting ct-26 did cross my mind but my flex vce has been awesome and I don’t need 26. Only thing I’m missing is the remote control for now
Sent from my iPhone using Tapatalk
« Last Edit: September 04, 2021, 12:41 PM by festal »