Author Topic: How to align and lock attachments to vacuum (CT15) hose nozzle?  (Read 355 times)

0 Members and 1 Guest are viewing this topic.

Offline thisvacuumsucks

  • Posts: 15
the nozzle on the hose has some symbols including a triangle which match the connectors on various attachments. my question is how to ensure they latch together and lock properly.

thanks.

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline Mario Turcot

  • Posts: 1288
Re: How to align and lock attachments to vacuum (CT15) hose nozzle?
« Reply #1 on: June 20, 2021, 10:37 PM »
With some practice you'll get use to it. After 3 years of use on sanders & DF 500, the hose never failed on me. When possible align the triangle with the groove on the tool. Push in about 6mm / 1/4" and twist to lock clock wise.
Mario