Author Topic: Question regarding using Bluetooth batteries with TSC 55  (Read 589 times)

0 Members and 1 Guest are viewing this topic.

Offline justaguy

  • Posts: 206
Question regarding using Bluetooth batteries with TSC 55
« on: February 12, 2019, 04:20 PM »
I use the TSC 55 sometimes away and sometimes in the shop. When in the shop I want the option of using the vac and having it run in auto mode. I'm going to add Bluetooth to my CT36 and a Bluetooth battery for my TSC 55. Would I be correct to assume that when I have two batteries installed on the TSC 55 only one needs to be Bluetooth and it doesn't matter which connection it's mounted to?

I'm guessing it's simply current draw that triggers the Bluetooth signal to start the vac but just want to confirm before ordering parts.
 
Thanks

Festool USA does not pre-approve the contents of this website nor endorse the application or use of any Festool product in any way other than in the manner described in the Festool Instruction Manual. To reduce the risk of serious injury and/or damage to your Festool product, always read, understand and follow all warnings and instructions in your Festool product's Instruction Manual. Although Festool strives for accuracy in the website material, the website may contain inaccuracies. Festool makes no representations about the accuracy, reliability, completeness or timeliness of the material on this website or about the results to be obtained from using the website. Festool and its affiliates cannot be responsible for improper postings or your reliance on the website's material. Your use of any material contained on this website is entirely at your own risk. The content contained on this site is provided for informational purposes only and does not constitute professional advice.


Offline neilc

  • Posts: 2766
Re: Question regarding using Bluetooth batteries with TSC 55
« Reply #1 on: February 12, 2019, 05:25 PM »
Yes - only one needs to be Bluetooth.  But a good idea to have two BT batteries so you can have one on the charger and still keep cutting with the vac triggering.

And when you change the battery, you have to resync bluetooth.   Just a matter of pushing the sync button the vac before you first turn on a saw with a fresh battery.